Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Mechanical installation
Mounting steps
Design 2
EZN3B0060H054
ƒ
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the basic
device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or cold−plate
technique, remove the bottom part 0 by releasing 6 screws.
3. Mount four fixing brackets 1 to the mains filter.
4. Mount the mains filter in the control cabinet.
38
l
EZN−034b
EDKZNXXXX−003 DE/EN/FR 2.0
Werbung
Kapitel
Inhaltsverzeichnis
