Mechanical Installation; Important Notes - Lenze EZN3x0060H054 series Montageanleitung

5

Mechanical installation

Important notes

5 Mechanical installation
5.1 Important notes
The mounting location must always comply with the operating conditions specified
ƒ
in the technical data (¶ 33). Take additional measures if necessary.
The mounting plate of the control cabinet must have the following properties:
ƒ
– electrically conductive
– free of lacquer
A free air circulation must be ensured for dissipating the heat.
ƒ
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
36
Injury to persons, particularly backache when lifting and holding the device,
respectively
Injury to persons and damage to material assets due to the device falling
down
The device must only be carried with a load bearing system such as an
indoor crane permitted for the device weight
Before the transport, the hoist, the load bearing system and lifting
accessories must be checked for sufficient payload and faultless status
Do not remove the hoist and the lifting accessories until the device lies safe
on a stable surface or is finally mounted.
l
EDKZNXXXX−003 DE/EN/FR 2.0