Dispensing Hot Water; Information And Settings; Displaying Information; Displaying Settings - Siemens TK76K572 Gebrauchsanleitung

34 | English
Press start stop
process short.
Dried milk residue is diffi cult to
remove, so clean the milk frother
immediately after use
(see "Cleaning the milk system").

Dispensing hot water

Risk of burns
The milk frother (10), from
which the hot water flows, gets
very hot. After use, allow to cool down
first before touching.
The appliance can also be used to dispense
hot water, e.g. for tea.
1. Place a cup or glass under the coffee
outlet.
2. Select Hot water
rotary knob (4):
Hot water
3. Press (3) to switch to the tem­
>
perature selection. Set the required
temperature with the rotary knob
Hot water
4. Press
start stop
out of the milk frother outlet for about 40
seconds.
Press start stop
process short.
Siemens
(8) again to cut the
with the
)
–
+
)
–
+
(8); hot water runs
(8) again to cut the

Information and settings

Use
i
briefl y) and adjust settings (hold down for at
least three seconds).

Displaying information

In the Info menu (press
can call up the following information:
how many drinks have been dispensed

since the appliance was fi rst put into
operation
when the next service will be needed

....................................................................................

Displaying settings

Hold down
the different setting options are then
(4): displayed:
 Default settings
Language:
English
Use
<
the different setting options. The currently
active setting is always highlighted in white.
You can change the setting that is currently
displayed by turning the rotary knob
(7) to display information (press
i
Information/Service
Descale after
140 cups
(7) for at least 3 seconds;
i
Press start
and (3) to switch between
>
The changes you have made
are saved automatically. It is
not necessary to confi rm them
additionally.
(7) briefl y) you
(4).
TK76K572 | 09/2008