Instruction Manual; Intended Use - Makita DLM431 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Mowing width (blade diameter)
No load speed
Dimensions
(L x W x H)
Rated voltage
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Never put your hands and feet near the
blade under the mower. Blades continue to
rotate after the motor is switched off.
Remove the lock key before inspecting,
adjusting, cleaning, servicing, leaving and
storing the mower.
Only for EU countries
Cd
Ni-MH Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for lawn mowing.
during operation
when stored
(without grass basket)
Max. 1,490 mm x 460 mm x 1,020 mm
Min. 1,450 mm x 460 mm x 950 mm
490 mm x 460 mm x 910 mm
BL1815N/BL1820/BL1820B
17.8 kg
Noise
The typical A-weighted noise level determined accord-
ing to EN60335:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60335:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
6 ENGLISH
DLM431
430 mm
-1
3,600 min
D.C. 36 V
BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/
BL1860B
18.3 kg
) : 80 dB(A)
pA
) : 93 dB (A)
WA
2
) : 2.5 m/s or less
h
2