Change The Li-Ion Battery - B. Braun Aesculap Bonum Gebrauchsanweisung/Technische Beschreibung

Loss of capacity/performance due to
prolonged storage of the discharged
CAUTION
Li-ion battery!
Store Li-ion batteries only in fully
►
charged condition and recharge
stored batteries once every month.
Destruction of the product, charging
bay or Li-ion battery when inserting
CAUTION
the wrong type of battery in the
charging bay!
Insert Li-ion battery only in the
►
appropriate charging bay.
Note
Before starting, ensure that the mains voltage and
mains frequency indicated on the nameplate correspond
with the specifications of the mains power grid. When
connecting the charger, it is recommended that a fault-
current circuit breaker of at least type F with a tripping
current of max. 30 mA be used.
Note
The charger can be used by children if 8 years or older, as
well as by persons with reduced physical, sensory or
mental capacities or with lack of experience and knowl-
edge, if these persons are supervised or have been
instructed on how to use the device safely, and if they
understand the risks associated with the use of the
device.
►
Do not allow children to play with the device.
►
Do not allow children to clean or maintain the device without supervi-
sion.
Note
The Li-ion battery heats up slightly during charging.
Note
Disconnect the mains power cord at the mains socket
when the charger is not going to be used.
►
Only use the Aesculap charger GT643 (LC40) for charging the lithium
ion battery.
►
Insert the charger 22 power plug.
The LED, operation indicator d and the LED, warning indicator e light
up in succession for approx. 1 second; see figure F.
►
Insert the Li-Ion battery 21 into the charging bay of the charger 22 up
to the stop; see figure F.
The LED, operation indicator d blinks and the Li-Ion battery 21 is
charged.
When the LED, operation indicator d is permanently illuminated, the Li-
Ion battery is completely charged.
4.4

Change the Li-ion battery

►
Hold the battery-operated clipping machine g with the cutter head
downwards so that the lithium ion battery 21 does not fall down when
loosened, see Fig. 1.
►
Loosen the battery lock f with your thumb.
21
Fig. 1
►
Remove the lithium ion battery 21, and push the charged and/or
uncharged replacement lithium ion battery GT641 (3INR19/66-1) into
the battery-operated clipping machine g, see Fig. 2.
Fig. 2
f
g
21
g
5