Technical Data; Bonum Battery Operated Clipping Machine; Charger Gt643 (Lc40); Li-Ion Battery Gt641 (3Inr19/66-1) - B. Braun Aesculap Bonum Gebrauchsanweisung/Technische Beschreibung

11. Technical data

11.1 Bonum battery operated clipping machine

Stroke rate
Running time with a Li-ion battery
Nominal voltage
Capacity
Weight (with shearing head and bat-
tery)
Application temperature range

11.2 Charger GT643 (LC40)

Voltage range (current consumption)
Frequency
Charging voltage/Output voltage
Charging current/Output current
Weight (with cable and power supply
unit)

11.3 Li-Ion battery GT641 (3INR19/66-1)

Cell type
Nominal voltage
Capacity
Charging time
Weight

11.4 For EU countries only

We hereby declare, under sole responsibility, that this product is
in conformity with the following norms or norm-defining doc-
uments:
2004/108/EC EMC Directive
DIN EN 60335-1
DIN EN 60335-2-8
Safety of household and similar electrical appliances
– general requirements
– for hair shearing machines
Aesculap Suhl GmbH
max. 2 500 rpm
approx. 70 min to 80 min
max. 10.8 V
max. 2 A
950 g
0 ? to 40 ?
220 V to 240 V
50 Hz to 60 Hz
max. 10.8 V
max. 2.3 A
360 g
Li
10.8 V
2 Ah
approx. 53 min
190 g

12. Disposal

Electric tools, accessories and packaging should be handed over for envi-
ronmentally responsible recycling.
12.1 For EU countries only
Do not throw electric tools in the domestic waste!
According to European Directive 2012/19/EU on old
electrical and electronic appliances and its implemen-
tation in national law, electrical tools that are no longer
suitable for use must be separately collected and sent
for environmentally responsible recycling.

12.2 Li-ion battery

Do not dispose of Li-ion batteries in domestic waste, fire or water. Defec-
tive or used Li-ion batteries must be collected, recycled or disposed of in
an environmentally-friendly way according to Directive 2006/66/EC.

13. Two year guarantee

Dear Customer,
Many thanks for choosing one of our products.
For decades, the name Aesculap has stood for proven quality and first-
class service. We are known to provide innovative, high-performance
products for our customers. Aesculap manufactures high-quality devices
and can assure you that it uses high-quality materials and careful manu-
facturing processes. We would like to point out to you that we are not lia-
ble for defects in our products, if these are caused by improper use, normal
wear or are caused by the product being improperly used or if inappropri-
ate or not properly functioning third-party products are used.
Parts that are typically subject to wear, and for which we are therefore not
liable, are the battery and shearing head. Material defects that do not
affect or only negligibly affect the value or function of the product are also
excluded from our warranty.
If we are liable under our warranty, we reserve the right to repair or
replace the product.
en
11