10.4 Chassis
The Everyday Activity Seat is designed to
fit onto one of two chassis options. This
user manual shows the correct and safe use
of the seating system with these chassis
options.
The castors on the chassis include
directional locks. To apply the locks push
down on the grey pedal. When the directional
locks are in use the chair will steer with the
back castors.
10.5 Height Adjustment
– Hi-low chassis
You can carry out this adjustment with the
child in the chair. To adjust the height of the
Hi-low chassis press the foot lever at the
rear of the chassis whilst holding the push
handle. Once you remove your foot from the
pedal the seat will be fixed at the chosen
height.
For safety the height adjustment pedal on
the chassis can be locked by engaging the
pull pin (a) on the right hand side of the
pedal. To unlock pull the pin out and rotate
90 degrees, the pedal can then be operated.
The locking pin (a) should be kept in the
locked position when you are not adjusting
the chassis.
Always keep the locking pin engaged
when you are not adjusting the chassis.
This will prevent the foot pedal being
operated accidentally.