Leckey Everyday Activity Benutzerhandbuch Seite 33

10.1 Transferring your
child into and out of the
seat
Before transferring the child into the seat
carry out the daily product inspection as
outlined in section 13 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards
to maximise product stability. Make sure
the safety buckle on the chest harness is
released and is out of the way to facilitate
transfer.
If the seat has flip-away chest laterals, first
move these out of the way. Unclip the pelvic
harness in the middle. Lastly if sandals are
fitted open the straps. You are now ready to
transfer or hoist the child into the seat.
Once the child is in the seat, firstly fasten the
pelvic harness using the middle buckle. Then
refasten the sandal straps and any other
harnesses, and reposition the chest laterals.
Always secure the pelvic harness or
Pelvic Cradle first before fastening
other buckles or harnesses. Adjust the
harness so the child cannot slide or
creep forward in the seat.
10.2 Adjusting the pelvic
harness
The correct positioning and tensioning of the
pelvic harness is key to a child's postural
management, affecting their comfort and
ability to carry out activities. Please consult
with your therapist to ensure the harness is
positioned correctly and that the straps are
tensioned appropriately.
To tension the pelvic harness straps and
pads around the child pull the centre strap
(a). Pull the two side straps up to fine tune
the pelvic position and adjust (b) the height
of the pads on the hips.
If using the seat outdoors and your child is
wearing a coat, position the pelvic harness
under the coat.
B
A