Walimex Pro Newcomer 100 Gebrauchsanleitung Seite 48

1
Push-button

2
Push-button

3 Push-button MODEL
4 LED MODEL
5 Push-button SLAVE
6 LED SLAVE
7 Push-button AUDIO
8 LED AUDIO
9 Push-button TEST
10 Standby display LED
11 Digital Display OUTPUT POWER
12 Main Switch O/I (OFF/ON)
13 Socket for power cord
14 Ventilation slots
15 Photo cell
16 Connecting Socket for sync cord
17 Fuse holder
48
Modelling light power setting/
settings for radio remote triggering
Modelling light power setting/
settings for radio remote triggering
Switches the modelling light on/off
Lights when the modelling light is switched on.
Switch on and off for photo cell
Lights when the photo cell is switched on.
Switches the acoustic beeper button on
Lights when the audible standby indication is
switched on.
Triggers a test flash
Lights when the adjusted flash power is reached
(device ready for flashing)
Shows the power level of the modelling light and
the control value for flash power
Switches the device on and off
Connection for external power supply
This cools down the flash electronics.
To trigger the photo cell
Connection socket for sync cord or remote
receiver (optional)
Contains the micro-fuse and spare fuse