auna MVD-420 Bedienungsanleitung Seite 37

Tap on
LO/DX:
Press and hold the number button you want to save the current station upon for future
Save Presets:
quick access.
Automatic Scan and Preset Saving:
station scan will be performed. The 6 stations with best perception quality will automatically be saved on
the 6 available preset memory locations within the current band. The first of these 6 stations will be tuned
in, afterwards.
Tap briefly to perform a kind of intro-function analogue to the corresponding CD function (all stations
will be tuned in, one after another, for a few seconds, to give you an overview over the current programmes.
RDS Functions and Settings: Open the settings menu from the home screen (
GENERAL -> RADIO. Here, you have access to the settings
• REGION SET (Europe / USA / American 1 / American 2 / OIRT),
• RDS REGIONAL ("ON" = the local stations of trans-regionally distributed broadcasters will be tuned in
automatically, when available - this overrides the AF function),
• RDS PI ( = Program Identification; when in an area where two emmitted broadcasting signals overlap,
activate this function to prevent from noise and hum),
• RDS TA (prioritization of traffic announcements) and
• RDS AF (automated switching to alternative frequency of the current station - when available).
Clarification:
TA: "Traffic Announcement". With this function activated, the device performs a scan for stations dis-
tributing traffic announcements (scan is performed in the background).
When a relevant station is identified, "TP" is displayed.
Traffic announcements will be tuned in, interrupting any other media playback at that time. After the
traffic announcement the device jumps back to the media playback that was paused. You can manually
interrupt the traffic news by tapping on the TA button.
AF: "Alternative Frequency" is an RDS function. When active, the device keeps performing a scan (in
the background) for frequencies that ensure the more flawless reception of the currently playing sta-
tion. Where present, this alternative frequency will be switched to automatically. "NEW FREQUENCY"
will be displayed for some seconds.
Tap on the PTY button (lower left corner of the radio screen) to scan for stations on the
PTY - Function:
basis of PTY (=programme type) criteria, such as "Sports", "News, "Weather", "Pop", et cetera. If no station
matching the search criteria is found, the message "NO PTY" is displayed, and the station most recently
listened to will be tuned in again.
, to toggle between
Press and hold the search button
the TA modes
for 2 seconds. An automatic
LOCAL / DISTANT.
) and click through to
37