Wohler VIS 2000 Bedienungsanleitung Seite 26

7. System components
7.4.7 Viper Camera Holder (Order no. 8680 J)
7.4.8 Camera Spring Guide (Order no. 8633 J)
7.4.9 Special Cable (Order no. 9181 L)
0.8 m, for the connection of the Camera rod to the monitor.
7.4.10 Camera rod
Camera rod black, flexible, 6 mm Ø, 5 m long
Camera rod black, flexible, 6 mm Ø, 20 m long
Camera rod black, flexible, 6 mm Ø, 30 m long
Camera rod red, stable, 7 mm Ø, 5 m long
Camera rod red, stable, 7 mm Ø, 20 m long
Camera rod red, stable, 7 mm Ø, 30 m long
26 Hotline: 0 29 53 / 73 211
Miniature camera head VIS 2000
The viper camera holder disposes of a con-
nection cable and a M 10 thread and there-
fore can easily be installed to all camera rods.
The camera is in a protective cage and faces
down, so that incidental daylight does not
cause problems. Attached to rods both, hori-
zontal and vertical pipes can be examined.
For centering of the camera head in vertical
vents. A stainless steel spring prevents a ro-
tating and oscillating of the camera head. The
spring is adjustable on the tubing size.
(Order no. 7821 J)
(Order no. 7818 J)
(Order no. 7819 J)
(Order no. 7305 J)
(Order no. 7829 J)
(Order no. 7306 J)
Fax: 0 29 53 / 73 250