Inhaltsverzeichnis; Machine Information - Ferm HDM1017 Übersetzung Der Originalbetriebsanleitung

ROTARY HAMMER DRILL
HDM1017
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2 - 3.
Read this manual carefully, before using
the machine. Ensure that you know how
the machine works, and how it should be
operated. Maintain the machine in
accordance with the instructions, and
make certain that the machine functions
correctly. Store this manual and other
enclosed documentation with the
machine.
Intended use
The FDHD-900K is intended for drilling holes in
masonry such as brick, concrete and similar
materials. Furthermore, the machine can be used
as a demolition hammer in combination with the
SDS cold chisels provided. The machine is on no
account intended for other purposes.
Not suitable for construction site usage.
Please inspect the machine and accessories for
transit damage.
Contents
1. Machine information
2. Safety instructions
3. Operating
4. Maintenance
4

1. MACHInE InFORMATIOn

Technical specifications
Voltage
Frequency
Power rating
Rotational speed, not loaded 0 - 950/min
Impact rate
Max. bit diameter
Concrete
Steel
Wood
Weight
Lpa
Lwa
Vibration
When chiseling
When hammering in concrete 15.780 + 1.5 m/s
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Product information
Fig. A
1. Left/Right selection switch
2. On/Off switch
3. Speed control
4. Lock on button
5. Mode selection button
6. Auxiliary handle
7. Locking sleeve
230 V
50 Hz
900 W
0 - 4500/min
Ø 26 mm
Ø 13 mm
Ø 30 mm
4 kg
92.3 + 3 dB(A)
103.3 + 3 dB(A)
13.781 + 1.5 m/s
2
2