Farfisa ZHERO ZH1262B Bedienungsanleitung Seite 16

2 MAIN FUNCTIONS OF THE KEYS
The 6 keys on screen side and the wheel sensor allow the user to access the operating modes, setup and programming pages
of the videointercom; these keys modify their function according to the indications shown on the screen.
The " " and " " keys are dedicated to videointercom functions.
Warning. A dissuasion tone and the Farfisa logo flashing when any of the keys is pressed, warn the user that the function is
not available because the service is not active or the videointercom line is being used by other users.
Key functions in stand-by mode
By touching the wheel sensor and the 6 keys fitted to the side of the screen, the user will display the functions available. A further
touch will enable the function shown on the screen.
The " " and " " keys instead, activate their function directly.
Every key , ,
and enables the func-
tion shown on the screen and
varies according to the operating
state of the videointercom.
It enables:
- monitor of external video door
stations (or the last active sta-
tion if there are several en-
trances);
- voice communication after hav-
ing received a call or monitoring
function;
- closing the communication with
the external door station. The
conversation also ends when
the conversation time of the
monitor or the system expires.
How to use the middle wheel
Rotary movement for
selecting or searching
, ,
Rotary movement for selecting
or searching and subsequent
touch to confirm
How to move the cursor or change the page
Slide the cursor up
P r e v i o u s
page or
cursor to
the left
Slide the cursor
down
- 16 -
It enables operating the electric
door lock of the entrance in
communication or the last
entrance which has made a call.
Next page
or cursor to
the right
Mi 2475