Sony PS3 CECH-ZCD1 Bedienungsanleitung Seite 4

3
Attach the hard disk drive to the mounting bracket with the silver screws.
While inserting the screws into the mounting bracket, keep the rubber inserts
over the mounting bracket's screw holes.
Installing the hard disk drive in the PS3™ system
1
Press the power button to turn off the PS3™ system.
The power indicator turns solid red and the system enters standby mode.
2
Unplug the AC power cord, and then disconnect the other cables from the
system.
For safety reasons, remove the plug for the power cord from the electrical outlet,
and then detach the other cables.
3
Slide the HDD bay cover in the direction of the arrow to remove it.
4
Insert the hard disk drive into the PS3™ system.
Be sure to fully insert the hard disk drive in the PS3™ system.
HDD bay cover