Efco Uhlig 43 000 22 Betriebsanleitung Seite 67

efco - uhlig Industrieprodukte • Große Ahlmühle 10
EC declaration of conformity in accordance with
EC machinery directive 2006/42/EC Annex II 1.A
The manufacturer / distributor
hobbygross Erler GmbH
Efco-Uhlig Industrieprodukte
Große Ahlmühle 10
76865 Rohrbach
hereby declares that the product mentioned below,
Product designation:
Product manufactured by:
Serial number:
Designation of the series or type:
conforms to all relevant provisions of the Directive mentioned above as well as to those of the other
Directives (mentioned below) that have been applied - including any amendments thereto which are in force
at the time of the declaration.
In addition, the EC Directives mentioned in the following have been applied:
EMC directive 2004/108/EC
Low voltage directive 2006/95/EC
The harmonised standards mentioned in the following have been applied:
EN 55014-1:2006
EN 60335-1:1994/A15:2000
EN 60335-1:2002/A2:2006
EN 60335-1:2002
EN 842:1996+A1:2008
Name and address of the person authorised to compile the relevant technical documentation:
Horst Herrel
Place: 76865 Rohrbach / Germany
_______________________________ _______________________________
(signature)
Martin Erler, General Manager
hobbygross Erler GmbH
Große Ahlmühle 10
Fon: +49 6349/9934-0
76 865 Rohrbach e-mail info@efco.de
Germany http:// www.efco.de
• 76865 Rohrbach • Germany
MetalClay 1100
Kiln combination
Uhlig
4300021
43 000 22
Date: 01st Oct. 2011
01st Oct. 2014
(signature)
Horst Herrel, head of QM dept.
Fax: +49 6349/9934-26
Geschäftsführer: Sitz der Gesellschaft:
Martin Erler Landau, HRB 3194
ppa. Pia Erler UST-ID-Nr. DE 811 203 211
Steuer-Nr. 24 664 / 02 568