Efco Uhlig 43 000 22 Betriebsanleitung Seite 40

01-S = first ramp temperature
Screenshot temperature setting of 200 ° C.
This ramp heats the kiln over two hours to 200 ° C.
Press OK to select.
02-t = 2nd ramp time
Screenshot shows 30 minutes .
Press OK to select.
02-S = 2nd ramp temperature
Screenshot shows 200 °C.
This ramp maintains the temperature for 30 minutes of 200 ° C.
Press OK to select.
03-t = 3rd ramp time
Screenshot shows 1 minute
Press OK to select.