General; Applications; Operating Instructions - Terrier TTL Gebrauchsanleitung

CONTENTS
1 General
2 Applications
3 Operating instructions
4 Safety instructions
5 Hoisting
6 Maintenance
7 Disassembly/assembly
8 Overhaul
9 Disposal
10 Troubleshooting checklist
11 Warranty
1

GENERAL

Thank you for choosing one of our high-quality products.The quality systems of manage-
ment and services of Terrier Lifting Clamps B.V. fully comply with ISO 9001 standards. The
many years of vast experience are a guarantee of optimum quality and safety. Terrier lifting
clamps are manufactured from high quality alloy steels and comply fully with all standards
and product requirements including: European standard NEN13155, Australian standard:
4991, US standard: ASME B30.20-2010 and machinery directive 2006/42/EG.
2

APPLICATIONS

The TTL lifting clamps are specifically designed for horizontal lifting and transporting
tubes, bundles of tubes and round material. The Terrier TTL lifting clamp includes 4 clamp-
ing jaws, a lifting eye and a lock for the open position. The clamp is locked in an open
position. The clamp closes by turning the lever away and moving the lifting eye upwards.
The device is now ready for lifting. The clamp opens automatically when the load is put
down. For lifting the aforementioned materials, the TTL safety clamps can be used per
item or with several clamps simultaneously. It is important that the load is equally divided
over each clamp when using 2 or more clamps. It is recommended to use an spreader beam
in that case. You can request additional technical documentation from the manufacturer.
3

OPERATING INSTRUCTIONS

Place the clamp in an open position exactly in the centre of the object that has to be lifted
or - in case of using several clamps - equally divided over the object that has to be lifted.
Turn the safety lever away so that the clamp can close when the crane starts to hoist. Guide
this until the object starts to come off the ground. Now you can lift the object unguided.
Upon reaching the destination, lower the crane hook until the clamp is completely free of
the load, in other words, the lifting chain is no longer taught and the clamp and chain can
move freely. Close the safety lever. The clamp can now be reused immediately or stored
away in the open position.
9
9
9
10
11
11
12
12
12
13
13
9