Accumulation - OHAUS Ranger 1000-Serie Bedienungsanleitung

RANGER 1000 SERIES EN-9
4.5

Accumulation

Place the item to be weighed on the pan (ex. 300g) then press
M+. The accumulation entry "ACC 01" is displayed
momentarily indicating number of accumulations before ACC 01
showing the total weight and then returns to normal weighing
mode.
To perform the next accumulation operation, the scale must be
returned to zero.
To display the total accumulation times and weight, press
M+ key when the weight on the pan is less than 10d, then
the display will show the accumulation times and total weight
successively before returning to normal weighing mode after 4
seconds.
To clear the accumulation data, when the display shows the
accumulation data press No. key to clear the data.