Storing Piece Weight Into Memory; Recalling Piece Weight From Memory; Accumulation: Weight And Quantity - OHAUS EC3 Bedienungsanleitung

EC Series

4.7 Storing Piece Weight into Memory

There are 10 memory locations (0 to 9 numeric keys) available to store APW values.
After determining the piece weight
(refer to Sec. 4.5 or 4.6 ), long-press
APW for approx. 2 seconds. "StorE"
will flash on the display.
Press any one of the numeric keys
to store the piece weight data in this
selected location.
NOTE: Stored APW values are retained when the unit is turned off.

4.8 Recalling Piece Weight from Memory

Press the numeric key (ex. location 5)
with the stored piece weight data (ex.
40 g/pc), then press APW two times.
The stored data will be uploaded and
displayed.

4.9 Accumulation: Weight and Quantity

Accumulation is indicated by the
Place the item to be weighed/counted
on the pan (ex. 300g with APW of
60g). Press M+. "Add", then the
accumulation event is displayed
momentarily before reverting to nor-
mal weighing mode.
NOTE: Weight display must return to
zero before the next accumulation
can register.
To recall Total Accumulation data,
press M+ with no weight on the pan.
The data is displayed momentarily
before reverting to normal weighing
mode.
To clear the Total Accumulation data,
press C while the data is displayed.
NOTE: Accumulation data is not retained when the unit is turned off.
Weight g
Piece Weight
0.0.
0.0.
0.0.
Weight g
Piece Weight
0.0.
0.0.
0.0.
annunciator.
Weight g
Piece Weight
300.0.
------.
300.0.
Total Accumulated Total Accumulation
Weight
300.0.
Weight g
Piece Weight
1500.0.
Total Accumulated Total Accumulation
Weight
1500.0.
Count
g/pc
40..
S S S S S t t t t t orE orE orE orE
orE
40.0.
Count
g/pc
0..
5..
Memory Location
40.000
Count
g/pc
60.0000
Add ------.
=01=
Total Accumulated
Times
60.000.
Count
g/pc
=05=
Total Accumulated
Times
60.000.
EN-9
pcs
0..
0..
0..
pcs
0..
0. 0. 0. 0.
0..
0..
pcs
5..
5..
Count
5..
pcs
25..
Count
25..