Herunterladen Inhalt Inhalt Diese Seite drucken

Sony BKM-250TGM Gebrauchsanweisung Seite 8

Vorschau ausblenden Andere Handbücher für BKM-250TGM:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
Overview
The BKM-250TGM 3G/HD/SD-SDI Input
Adaptor is a video signal input adaptor for
Sony monitors.
When installed in an input option slot on the
main unit, it provides video input and output
connectors for the main unit and a decoder for
3G/HD/SD serial digital component signals.
Notes
• There are some monitors that are not
compatible with this unit.
To check if the monitor is compatible with
this unit, refer to the instructions for use for
the monitor.
• The model name displayed on the monitor's
STATUS menu is "BKM-250TG."
Function
Decoder for serial digital component
signals
The BKM-250TGM supports 3G-SDI that
transmits 1080/50P or 1080/60P signals using
a single BNC cable, and is equipped with a
built-in decoder for 3G/HD/SD serial digital
component signal.
Serial digital input and output signal
connector
The BKM-250TGM is equipped with two
input connectors and monitor output
connectors that correspond to each input signal
for serial digital signals.
8
Overview / Function / Using the Input and Output Connectors
Using the Input and
Output Connectors
For information about installing the BKM-
250TGM in an input option slot on the main unit,
refer to the instructions for use for the monitor.
Configuration of input/output
connectors and signals that may be
input
The configuration of the input and output
connectors, and the signals that may be input
are shown below.
1
1
3G SDI
IN
OUT
1 Input serial digital component signals.
2 Output serial digital component monitor
signals.
Input of serial digital component
signals
You can input serial digital signals to
connectors 1 and output signals displayed on
the screen of the main unit or the monitor from
connector 2.
You need not attach the 75Ω termination to
connector 2.
Notes
• The OUT connector (monitor out) outputs
signal only when the power of the main unit
is ON. The monitor out signal is not output
when the monitor is in standby mode.
• The signal from the OUT connector does not
comply with ON-LINE output signal
specifications.
2
2
250TG
IN
OUT

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis