Measuring Ac And Dc Voltage - Amprobe AM-520 Bedienungshandbuch

REL
RANGE
MAX/MIN
Press to enable the function when at relevant rotary switch function.
Auto Power OFF
Auto power off: approx. 15 minutes.
When the Meter is in auto power off mode, press any button to resume
normal operation.

Measuring AC and DC Voltage

Press SELECT button to select AC/DC voltage measurement function.
X�
To avoid personal injury or damage to the Meter, do not apply
voltage higher than 600Vac and 600Vdc.
Relative zero mode
Manual or Auto range switching. The default setting
is Auto ranging, press to switch to manual ranging
(selectable resolutions). Press for 2 sec to return to auto
ranging.
Maximum / minimum reading memory.
Flash light
6