Listen To Music In Aux Mode; Care And Maintenance; Removing An Old Pickup Needle; Inserting A New Pickup Needle - Silvercrest 288644 Bedienungs- Und Sicherheitshinweise

Click "OK" . The MP3 file will be saved .
¾ ¾
Repeat these steps to export further parts of the
¾ ¾
recording as individual files .
NOTE: The window to enter information for
the ID3 tag of MP3 files only appears for the
first export . The data that you entered for the
first export is used for all other parts .
˜ Listen to music in AUX Mode
Plug the end of the AUX cable (3 .5 mm jack
¾ ¾
plug cable – not included in delivery) into the
AUX input jack
19
player . Plug the other into a compatible
14
device .
NOTES:
The AUX input has priority over the record
¾ ¾
player .
The sound can only be controlled using the
¾ ¾
connected device .
˜ Care and maintenance
˜ Removing an old pickup
needle
Carefully place a screw driver on the edge of
¾ ¾
the pickup needle
Remove the old pickup needle
¾ ¾
carefully downwards and forwards .
62 GB/MT
on the back of the record
and press down .
8
by pulling it
8
˜ Inserting a new pickup needle
Hold the pickup needle
¾ ¾
edge (needle side) and place the rear edge on
the tonearm .
3
Push the pickup needle
¾ ¾
locks into place .
ATTENTION! Ensure that the product is
turned off before you replace the pickup
needle . Do not snap the pickup needle
8
or touch the needle . Injuries may otherwise
occur .
˜ Cleaning the product
Do not immerse the product in water or other
¾ ¾
liquids .
Avoid all contact between the product and
¾ ¾
water or damp and wet conditions .
Do not use any strong cleaning products, as
¾ ¾
these will damage the product .
Avoid contact with sharp objects, as these can
¾ ¾
damage the product .
Clean the product with a soft, dry and lint-free
¾ ¾
cloth . If stains are persistent, a lightly moistened
cloth with a mild cleaning agent may be used .
by the forward
8
upwards until it
8
8