Technical Specs And Terminal Configuration - Siemens SIMEAS Q80 7KG8080 Betriebsanleitung

14

Technical specs and terminal configuration

Operating conditions
Unless otherwise stated, the following conditions must be met for use of SIMEAS Q80 7KG8080:
· use indoors
· altitude up to 2000 m NN
· operating temperature range of -10 °C through 55 °C without condensation
· maximum relative humidity: 80 % for temperatures up to 31 °C, decreasing linearly to 50 % relative humidity at
40 °C
· in case of power supply from the power grid, voltage fluctuations of no more than ±10 % from the nominal value
(for other power supplies, the respective voltage fluctuation limitations apply)
· transient voltage surges conforming to overvoltage categories I, II and III. For power supply from the grid, the
lowest and most common overvoltage category II is to be applied.
· Pollution degree 1 or 2 in accordance with IEC 60664
Technical specs and terminal configuration
Power Quality Recorder SIMEAS Q80 7KG8080, Operating instruction
E50417-B1074-C419-A1, Release 07.05.2010
E-63