Ext Setting; S-In (S-Video Input); Id List; Dubbing - JVC PD-42V31BJE Serviceanleitung

EXT SETTING

Refer to "Using the TV's menu" (see page 20) for details of
displaying the menu.
EXT SETTING
EXT-1

DUBBING

EXT-3
EXT-2
EXT-5
EXT-4
TV
BACK

ID LIST

TV OK
S-IN
D0020-EN

S-IN (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy
the high-quality picture of the S-VIDEO signal (Y/C
signal).
Preparation:
• First read the device's instruction manual and
"Additional preparation" on page 37 to connect the
device to the TV properly. Second, follow the device's
instruction manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
• Do not set S-IN (S-VIDEO input) to the EXT terminal
connected to a device which cannot output an S-VIDEO
(Y/C signal). If it is set wrongly, a picture cannot appear.
1 Choose an EXT terminal
2 Press the yellow button and set the S-IN (S-
VIDEO input).
Then press the a a button
a a
An S-IN (S-VIDEO input) mark is displayed. You can
view an S-VIDEO signal (Y/C signal) instead of the
regular video signal (composite signal).
To cancel the S-IN (S-VIDEO input) setting:
Press the yellow button and turn off S-IN (S-VIDEO
input) mark. The regular video signal (composite signal)
pictures are resumed.
• The EXT-1 terminal does not support S-VIDEO
signal (Y/C signal) and you cannot set S-IN (S-
VIDEO input) in the EXT-1 terminal.
• Setting S-IN (S-VIDEO input) changes the head
character from "E" to "S". When an EXT terminal
receives a normal video signal, "E2", "E3" or "E5"
appears on the display. This changes to "S2", "S3" or
"S5" when it receives an S-VIDEO signal.
• Even a device which can output an
S-VIDEO signal (Y/C signal) may output a regular
video signal (composite signal) depending on the
device setting. If a picture cannot appear because the
S-IN (S-VIDEO input) setting has been made, read
the device instruction manual carefully again to
check for the device settings.
ID LIST
You can have a name corresponding to the devices
connected for each EXT terminal. Giving a name to an EXT
terminal makes the EXT terminal number appear on the
screen, together with the name.
1 Choose an EXT terminal
2 Press the blue button to display the name list
(ID LIST)
EXT SETTING
EXT-1
DUBBING
EXT-3
EXT-2
EXT-5
EXT-4
TV
BACK
TV
OK
D0021-EN
3 Press the 6 6 buttons to choose a name. Then
6 6
press the a a a a button
The ID LIST disappears and the name is assigned to the
EXT terminal.
• You cannot assign an EXT terminal name not found
in the name list (ID LIST).
To erase a name assigned to the EXT terminal:
Choose a blank space.
4 Press the a a a button to complete the setting a
DUBBING
You can choose a signal source to be output from the EXT-
2 terminal.
You can do this with the output signals of the devices
connected to other EXT terminals, or with the picture and
sound from a TV channel you are currently viewing.
1 Press the 5 5 buttons to choose the arrow
5 5
from the menu
EXT SETTING
EXT-1
DUBBING
EXT-3
EXT-2
EXT-5
TV
BACK
TV OK
D0022-EN
ID LIST
VHS
S-VHS
DVC
SAT
STB
GAME
LD
DVD
8mm
Hi-8
EXT-4
27