Tools Required; Scope Of Delivery; Applications - Waeco PowerPack 5in1 Bedienungsanleitung

PS-300-IC.qxd 16.11.2005
Regarding the working lamp
- Never operate the working lamp without protective cover (risk of breakage and
injury)!
Regarding the compressor
- Never operate the compressor with defective or damaged valves, connectors
or adapters!
Protect your environment!
Recycle the packing material!
A damaged or defective PowerPack (battery) should not be disposed of in the
normal domestic waste!
See Quantity
A1 1
A2 1
A3 1
A4 1
A5 1
A6 1
The PowerPack is a multi-function unit which combines the most important functions of
various accessory devices in one housing.
The compressor serves for pumping up objects of small volumes (car and bike tyres etc.).
The compressor should cool down for approx. 10 minutes after an operation time of 10
minutes.
The starting aid function is designed for a current load of approx. 50 A.
When using as mobile 12 V voltage supply, the max. current consumption of the
consuming unit may amount to max.10 A altogether.
The installed 230 V inverter has a load of a max. 250 watts.
Caution! Pay attention to the voltage and current consumption of the equipment
being operated in order not to overcharge the PowerPack. Overcharging may
cause the failure of the PowerPack or of the equipment being operated.
The voltage and current consumption can be found on the nameplate or in the operating
instructions of the equipment being used.
12:28 Uhr Seite 18
Safety instructions

Scope of delivery

Designation
PowerPack
Booster cable
Mains charger
12 V charging cord
Adapter-set compressor
Storage bag
Intended use
18
Article No.