Electrical Connection; Start-Up; Maintenance And Servicing; Cleaning Of The Radiators - Eos Infrasky 3000 Montage- Und Gebrauchsanweisung

Electrical connection

Connector for
power cord
Power cord (enclosed)
Put the enclosed power cord into the connec-
tor at the top of the tanner.
Attach the connecting leads to 230 V.
The InfraSky 3000 has to be permanent con-
nected at 230 V.
Because of the higher starting current has the
unit to be fused by a 16A circuit breaker with
K characteristic.
The line connection may be carried
out only by a qualifi ed electrician .
14
Connection for
coin box / timer
Fig. 6
connecting
leads
Fig. 7
Fig. 8
GB

Start-up

Either you just plug in the device or you can
use a coin box.
The connection of a coin box is documented
in the connection diagram on the last page of
the instructions.
Recommended exposure distance:
approx. 1.40 m
approx. 1.40 m
ca. 1,40 m
Be aware that loungers made of
certain types of plastic may get de-
formed or damaged due to the prolonged
exposure to heat.

Maintenance and servicing

Disconnect the system from the
power source before servicing or
other works.

Cleaning of the radiators

Use a damp cloth for cleaning of the unit.
Never use corrosive cleaning substances
(solvents, acids, etc.). Use water with soap
when necessary.
Important: Make sure that no moisture
gets on the IR-radiator or terminals
Fig. 9