Ecom Ex-PMR 1000 Bedienungsanleitung Seite 26

a Antenna
b Channel switch
This knob is turned to select channel storage spaces 1 – S (channel S can be programmed
as a search run function) For pre-set channels and pilot tones, see table: "Default Values of
Channels" under Item 8.4.4
c LED display
The red LED display illuminates when transmitting. The green LED display illuminates when
receiving. The red LED flashes when the battery voltage is low.
d ON/OFF and volume control
Turn the knob clockwise to turn the device on. To turn the device off, turn it counter clockwi-
se until a signal tone sounds. When the radio unit is turned on, this knob is used to control
the volume.
e Loudspeaker
f Microphone
g PTT (Push to Talk)
PTT is pressed for transmitting and PTT is released for receiving.
h Monitor key
Press the MONI key to monitor activities on the current channel.
i Loudspeaker/microphone sockets
When these accessory sockets are not being used, cover them up with the protective cap.
j Belt clip
k Ex-battery module
l Battery locking mechanism
9.2 Functions
All 8 channels are very easy to switch
The Ex-PMR 1000 can be operated on all 8 channels.
FM for crystal-clear connections
Transmission is in frequency modulation (FM), which ensures lifelike and low-disturbance
playback, as with the UKW.
25