Cleaning; Technical Data; Disposal - Beurer MP 60 Gebrauchsanweisung

4. Cleaning

Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also moisten the cloth with mild
soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with a cloth or brush
moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen, do not use the in-
strument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liquids.

5. Technical data

Power unit voltage Input:
Speed:

6. Disposal

Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
100-240 V AC / 50/60 Hz / 0.3 A
Output: 21 V DC / 200 mA
2600 r.p.m.–6100 r.p.m. ±12%
11