Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off; Cleaning And Maintenance - Beurer HK 42 Supercosy Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

4.6 Switching off

To switch the heat pad off, set the slider for ON/OFF and temperature settings to setting "0" (OFF). The
temperature settings are then no longer illuminated.
NOTE:
If the heat pad is not in use, switch the side slider for ON/OFF to setting "0" (OFF) and unplug the power
plug from the socket. Then disconnect the control from the heat pad by unplugging the plug-in coupling.

5. Cleaning and maintenance

WARNING
Before cleaning, always remove the power plug from the socket first. Then disconnect the control from
the heat pad by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• Small marks on the heat pad can be removed with a damp cloth and if necessary, with a little liquid de-
tergent for delicate laundry.
CAUTION
Please note that the heat pad may not be chemically cleaned, wrung out, tumble dried, put through
a mangle or ironed. Otherwise the heat pad may be damaged.
• This heat pad is machine-washable.
• Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry
detergent and measure it out according to the manufacturer's instructions.
CAUTION
Please note that frequent washing of the heat pad has a negative effect on the product. The heat pad
should therefore be washed in a washing machine a maximum of 10 times during its life.
• Immediately after washing, reshape the heat pad to its original dimensions while it is still damp and spread
it out flat on a clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the heat pad to the clothes horse. Otherwise the heat
pad may be damaged.
• Do not reconnect the control to the heat pad until the plug-in connection and the heat pad are
completely dry. Otherwise the heat pad may be damaged.
WARNING
Never switch the heat pad on to dry it! Otherwise there is a risk of electric shock.
14

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis