Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
4. To mount the wall hood, tighten the two screws (M8) in the inlay (Ø 10 mm), until
they are not projected out of the hole for around 20 mm.
5. Hang the hood and tighten the nuts previously left loose.
6. Align the hood (check the installation measurements), tighten the nuts.
7. Open the front glass, remove the metal filter and fix both lower screws to the wall.
26
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
