3.
Bolt
Even though the torque coefficient and the
•
class of bolt are the same, the proper
fastening torque will differ according to the
diameter of bolt.
Even though the diameters of bolts are the
•
same, the proper fastening torque will differ
according to the torque coefficient, the class of
bolt and the bolt length.
4.
The manner of holding the tool or the material of
driving position to be fastened will affect the
torque.
Using the tool as a hand screwdriver
Fig.11
Switch off the tool.
Move the lock button to the locked position
Turn the tool.
NOTE:
Use the tool with a fastening torque less than 12.5
•
Nm.
This
use
is
•
screwdriving.
Do not use the tool for work requiring excessive
•
force, such as tightening bolt M10 or bolts greater
than M10 or removing rusted screws.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Phillips bit
•
Socket bit
•
Soft carrying case
•
Bit piece
•
Makita genuine battery and charger
•
convenient
for
checking
or
attachments
Only use
accessory or
the
are
7