Optional Accessories; Maintenance - Makita DHP482RTEB Betriebsanleitung

CAUTION:
pressure will only serve to damage the tip of your drill
service life of the tool.
CAUTION:
workpiece.
CAUTION:
A stuck drill bit can be removed
CAUTION:
Always secure small workpieces
in a vise or similar hold-down device.
CAUTION:
If the tool is operated continuously
with a fresh battery.

MAINTENANCE

CAUTION:
Always be sure that the tool is
maintenance.
NOTICE:
cracks may result.
1. Limit mark
Replace them when they wear down to the limit mark.
1. Use a screwdriver to remove two screws then
remove the rear cover.
1. Rear cover 2. Screw
2. Raise the arm part of the spring and then place
screwdriver of slender shaft or the like.
1. Recessed part 2. Spring 3.
3.
in reverse.
1.
4.
Make sure to place the lead wire in opposite side
of the arm.
1. Lead wire 2.
5.
1. Hole 2.
In fact, this excessive
10 ENGLISH
Reinstall the rear cover and tighten two screws
securely.
minute.
8.
operation when releasing the switch trigger. If electric
Factory Service Centers for repair.
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
accessories or attachments might present a risk of
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hook
NOTE:
differ from country to country.