ASROCK K7NF2-RAID Handbuch Seite 6

BIOS:
OS:
CAUTION!
1. While CPU overheat is detected, the system will automatically shutdown.
Please check if the CPU fan on the motherboard functions properly before
you resume the system. To improve heat dissipation, remember to spray
thermal grease between the CPU and the heatsink when you install the PC
system.
2. Do NOT insert a 3.3V AGP card into the AGP slot of K7NF2-RAID
motherboard! It may cause permanent damage!
3. Power Management for USB 2.0 works fine under Microsoft
XP SP1/2000 SP4. It may not work properly under Microsoft
98/ME.
4. Although K7NF2-RAID offers stepless control, it is not recommended to
perform over clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
The CPU host frequency of this motherboard is determined by the jumper-
setting. You must set the FSB jumper according to your AMD CPU before
you use the "Manual" option as the FSB setting in BIOS setup to perform
over clocking. Please check page 24 of "User Manual" in the Support CD for
details.
6 6 6 6 6
AMI legal BIOS;
Supports "Plug and Play";
ACPI 1.1 compliance wake up events;
SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 4)
Microsoft ® Windows ® 98 SE / ME / 2000 / XP compliant
ASRock K7NF2-RAID Motherboard
® Windows ®
® Windows ®