Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2008 ASRock INC. All rights reserved.
ASRock
Published August 2008
K10N78-1394 / K10N78
Motherboard
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK K10N78-1394

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 Motherboard Layout (K10N78-1394) Motherboard Layout (K10N78-1394) Motherboard Layout (K10N78-1394) Motherboard Layout (K10N78-1394) Motherboard Layout (K10N78-1394) PS2_USB_PW1 Jumper System Panel Header (PANEL1, Orange) ATX 12V Power Connector (ATX12V1) Chassis Speaker Header CPU Fan Connector (CPU_FAN1) (SPEAKER 1, Purple) CPU Heatsink Retention Module...
  • Seite 3 PCI Express x16 Slot (PCIE1, Green) USB 2.0 Header (USB6_7, Blue) Serial Port Connector (COM1) SATAII Connector (SATAII_1 (PORT0), Red) ATX Power Connector (ATXPWR1) SPI BIOS Chip SATAII Connector (SATAII_3 (PORT2), Red) 3 3 3 3 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 4 I/O P I/O P I/O Panel (K10N78-1394) anel (K10N78-1394) anel (K10N78-1394) anel (K10N78-1394) I/O P I/O P anel (K10N78-1394) PS/2 Mouse Port (Green) Line In (Light Blue) VGA/D-Sub Port ** 10 Front Speaker (Lime) USB 2.0 Ports (USB45) Microphone (Pink) IEEE 1394 Port USB 2.0 Ports (USB01)
  • Seite 5 “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. 5 5 5 5 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 6: Package Contents

    In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using.
  • Seite 7: Specifications

    Platform - ATX Form Factor: 12.0-in x 8.4-in, 30.5 cm x 21.3 cm - Solid Capacitor for CPU power (K10N78-1394) - Support for Socket AM2+ / AM2 processors: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon...
  • Seite 8 - 6 x Ready-to-Use USB 2.0 Ports - 1 x eSATAII Port (K10N78-1394) - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - 1 x IEEE 1394 Port (K10N78-1394) - HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/ Line in/Front Speaker/Microphone (see CAUTION 9) Connector - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,...
  • Seite 9 64-bit compliant Certifications - FCC, CE, WHQL * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third- party overclocking tools.
  • Seite 10 ASRock WiFi-802.11g or WiFi-802.11n module. ASRock website http://www.asrock.com 14. It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows ®...
  • Seite 11 To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 18. This motherboard supports ASRock AM2 Boost overclocking technology for AM2 CPU. If you enable this function in the BIOS setup, the memory perfor- mance will improve up to 12.5%, but the effect still depends on the AM2 CPU...
  • Seite 12 64-bit OS. If you install Windows XP / XP 64-bit OS, the function of ® 1080p Blu-ray (BD) / HD-DVD playback is not available, please visit our website for NVIDIA ® driver update in the future. ASRock website http://www.asrock.com ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 13 AMD Phenom X3 8400 Onboard VGA with DVI-D port Memory Dual Channel DDR2 533, 1GB x 2 Windows ® Vista or Windows ® Vista Playback Software CyberLink PowerDVD Ultra DVD Player Blu-ray-DVDRW-LG-GBW-H10N (BD) HD DVD-HP-TOSD-H802A-01 (HD-DVD) ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 14 When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 15: Cpu Installation

    Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 2/3, No. 3). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 16 Channel, for example, installing a pair of memory modules in DDRII_1 and DDRII_3, it is unable to activate the Dual Channel Memory Technology . It is not allowed to install a DDR memory module into DDR2 slot; otherwise, this motherboard and DIMM may be damaged. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 17: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 18: Installing An Expansion Card

    Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 19 Windows Vista ® ® HybridPower AMD Athlon X2 3800+ CPU Memory Dual Channel DDR2 667, 1024MB x 2 256MB or 512MB shared memory for motherboard GPU Suggested OS Windows Vista or Windows Vista ® ® ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 20 C. Switch your monitor cable to the connector on the I/O shield. After reboot your system, you are allowed to switch between GeForce ® Boost mode (Boost Performance) and HybridPower mode (Save Power) according to your request. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 21 CD to your system. Hybrid SLI driver is in the following path of ASRock support CD: (There are two ASRock support CD in the motherboard gift box pack, please choose the one for Windows ® Vista / Vista 64-bit.)
  • Seite 22 CD to your system. Hybrid SLI driver is in the following path of ASRock support CD: (There are two ASRock support CD in the motherboard gift box pack, please choose the one for Windows Vista / Vista 64-bit.)
  • Seite 23 HD-DVD disc, the content will be displayed only in one of the two monitors instead of both monitors. 2. This motherboard does not support dual monitor feature under DOS because in this situation, the VGA/DVI-D output is not available. There is no such limitation under Windows ® ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 24: For Windows

    For Windows Vista / Vista 64-bit OS: ® Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 25 PCs requires a secure connection to a compliant display. Due to the increase in manufacturers employing HDCP in their equipment, it is highly recommended that the HDTV or LCD monitor you purchase is compatible. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 26 B. Set the option “OnBoard HDMI HD Audio” to [Auto]. Step 2: Install HDMI audio driver to your system. Install “Onboard HDMI HD Audio Driver” from ASRock Support CD to your system. Step 3: Reboot your system. After you reboot the system, the HDMI audio function is available.
  • Seite 27 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear- CMOS action. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 28 No. 10) (SATAII_6 (PORT5): see p.2/3, No. 11) For K10N78-1394, SATAII_6 (PORT5) connector can be used for inter- nal storage device or be connected to eSATAII connector to support eSATAII device. Please read “eSATAII Interface Introduction” on page 33 for details about eSATAII and eSATAII installation procedures.
  • Seite 29 Data Cable can be connected to the SATA / SATAII hard disk or the SATAII (Optional) connector on this motherboard. For K10N78-1394, you can also use the SATA data cable to connect SATAII_6 (PORT5) connector and eSATAII connector. Serial ATA (SATA)
  • Seite 30 “Disable front panel jack detection”, and save the change by clicking “OK”. For Windows ® Vista / Vista 64-bit OS: Click the right-top “Folder” icon , choose “Disable front panel jack detection”, and save the change by clicking “OK”. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 31 Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation ATX Power Connector Please connect an ATX power supply to this connector. (24-pin ATXPWR1) (see p.2, No. 35 or p.3, No. 34) ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 32 SPDIF audio output to HDMI VGA (3-pin HDMI_SPDIF1) card, allows the system to (see p.2/3, No. 29) connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 33 2.10 eSAT T T T T AII Inter AII Inter AII Inter AII Inter AII Interface Introduction (Only for K10N78-1394) face Introduction (Only for K10N78-1394) face Introduction (Only for K10N78-1394) face Introduction (Only for K10N78-1394) face Introduction (Only for K10N78-1394) NOTE: 1.
  • Seite 34 If you want to install Windows ® XP, Windows ® XP 64-bit, Windows ® Vista Windows Vista 64-bit on your SATA / SATAII HDDs without RAID functions, please ® follow below procedures according to the OS you install. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 35 64-bit OS on your system. When you see “Where do you want to ® install Windows?” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the NVIDIA ®...
  • Seite 36 Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP. EXE” from the “BIN” folder in the Support CD to display the menus. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 37 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock K10N78-1394 / K10N78 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 38: Spezifikationen

    Spezifikationen Plattform - ATX-Formfaktor: 30.5 cm x 21.3 cm; 12.0 Zoll x 8.4 Zoll - Festkondensator für CPU-Leistung (K10N78-1394) - Unterstützung für Socket AM2+ / AM2-Prozessoren: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dualkern / Athlon X2 Dualkern / Athlon 64 / Sempron-Prozessor - Unterstützt CPU bis 140W...
  • Seite 39 - 1 x eSATAII Port (K10N78-1394) - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - 1 x IEEE 1394 Port (K10N78-1394) - HD Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon (siehe VORSICHT 9) Anschlüsse...
  • Seite 40 - Unterstützt Smart BIOS Support-CD - Treiber, Dienstprogramme, Antivirussoftware (Probeversion) Einzigartige - ASRock OC Tuner (siehe VORSICHT 14) Eigenschaft - Intelligent Energy Saver (Intelligente Energiesparfunktion) (siehe VORSICHT 15) - Hybrid Booster: - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 16) - ASRock U-COP (siehe VORSICHT 17) - Boot Failure Guard (B.F.G.
  • Seite 41 Seite 33, um sich detailliert über die eSATAII- und eSATAII- Installation zu informieren. 12. Das Power Management für USB 2.0 arbeitet unter Microsoft Windows ® ® Vista 64-Bit / Vista / XP 64-Bit / XP SP1 oder SP2 einwandfrei. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 42 Systemleistung unter der Windows ® Umgebung zu erreichen. Besuchen Sie bitte unsere Website für die Operationsverfahren von ASRock OC Tuner. ASRock-Website: http://www.asrock.com 15. Mit einer eigenen, modernen Hardware und speziellem Softwaredesign, bietet der Intelligent Energy Saver eine revolutionäre Technologie zur bisher unerreichten Energieeinsparung.
  • Seite 43: Installation

    Unterlage, oder zurück in die Tüte, mit der die Komponente geliefert wurde. Wenn Sie das Motherboard mit den Schrauben an dem Computergehäuse befestigen, überziehen Sie bitte die Schrauben nicht! Das Motherboard kann sonst beschädigt werden. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 44: Installation Des Cpu-Lüfters Und Des Kühlkörpers

    Kontakt zueinander haben. Verbinden Sie dann den CPU- Lüfter mit dem CPU-LÜFTER-Anschluss (CPU_FAN1, siehe Seite 2/3, Nr. 3). Beziehen Sie sich für eine richtige Installation auf die Handbücher des CPU- Lüfters und des Kühlkörpers. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 45: Installation Der Speichermodule (Dimm)

    2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) Die Motherboards K10N78-1394 / K10N78 bieten vier 240-pol. DDR2 (Double Data Rate 2) DIMM-Steckplätze und unterstützen die Dual-Kanal-Speichertechnologie. Für die Dual-Kanalkonfiguration dürfen Sie nur identische (gleiche Marke, Geschwindigkeit, Größe und gleicher Chiptyp) DDR2 DIMM-Paare in den...
  • Seite 46: Einsetzen Eines Dimm-Moduls

    Schäden am Mainboard und am DIMM-Modul. Schritt 3: Drücken Sie die DIMM-Module fest in die Steckplätze, so dass die Halteklammern an beiden Enden des Moduls einschnappen und das DIMM-Modul fest an Ort und Stelle sitzt. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 47: Einbau Einer Erweiterungskarte

    Express -Steckplätze) -Steckplätze) -Steckplätze) -Steckplätze) -Steckplätze) Es gibt einen 2 PCI-Steckplätze und 2 PCI Express-Steckplätze am K10N78-1394 / K10N78 Motherboard. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. PCI Express-Slots: PCIE1 (PCIE x16-Steckplatz; Grün) wird für PCI Express-Grafikkarten mit x16-Busbreite verwendet.
  • Seite 48: Mindest-Systemkonfiguration Für Hybrid Sli

    Website für künftige Grafikkarten-Updates. GeForce ® Boost Anbieter Chipsatz Modell Treiber NVIDIA GeForce 8400GS Gigabyte GV-NX84G256H 174.83 GeForce 8400GS Foxconn FV-N84SM2DT 174.83 GeForce 8400GS Leadtek WinFast PX8400 GS TDH 174.83 GeForce 8500GT Gigabyte GV-NX85T256H 174.83 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 49 Fahren Sie das Betriebssystem hoch. Installieren Sie den Hybrid SLI Treiber von unserer Support-CD auf Ihrem System. Der Hybrid SLI Treiber befindet sich im folgenden Pfad auf der ASRock-Support-CD: (Es gibt zwei ASRock-Support-CDs im Produktkarton des Motherboards; wählen Sie diejenige für Windows...
  • Seite 50 Fahren Sie das Betriebssystem hoch. Installieren Sie den Hybrid SLI Treiber von unserer Support-CD auf Ihrem System. Der Hybrid SLI Treiber befindet sich im folgenden Pfad auf der ASRock-Support-CD: (Es gibt zwei ASRock-Support-CDs im Produktkarton des Motherboards; wählen Sie diejenige für Windows...
  • Seite 51 Fahren Sie das Betriebssystem hoch. Installieren Sie den Hybrid SLI Treiber von unserer Support-CD auf Ihrem System. Der Hybrid SLI Treiber befindet sich im folgenden Pfad auf der ASRock-Support-CD: (Es gibt zwei ASRock-Support-CDs im Produktkarton des Motherboards; wählen Sie diejenige für Windows...
  • Seite 52: Einstellung Der Jumper

    CMOS gelöscht wurde. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS- Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 53 S.2/3 - No. 10) (SATAII_6 (PORT5): siehe S.2/3 - No. 11) Für K10N78-1394, SATAII_6 (PORT5) Verbindungsstück kann für interne Speichervorrichtung benutzt werden oder an eSATAII Verbindungsstück angeschlossen werden, um eSATAII Vorrichtung zu unterstützen. Bitte lesen Sie „SATAII Schnittstellen Einleitung“ auf Seite 33 für Details über eSATAII-und eSATAII-Installationsverfahren.
  • Seite 54 Datenkabel Datenkabels kann an die SATA / SATAII Festplatte oder das (Option) SATAII Verbindungsstück auf dieser Hauptplatine angeschlossen werden. Für K10N78-1394, sie können das SATA Datenkabel auch benutzen, um SATAII_6 (PORT5) Verbindungsstück und eSATAII Verbindungsstück anzuschließen. Serial ATA- (SATA-) Verbinden Sie das schwarze...
  • Seite 55 Unterstützung der WiFi+AP- Verbindungsstück Funktion mit ASRock WiFi-802. A Datenkabel für Funktion. Die 11g- oder WiFi-802.11n-Modul verwendbar, ein einfach zu SATAII benutzender Adapter für das aubt bis 3.0 Gb/s drahtlose lokale Netzwerk ungsrate. (WLAN). Hiermit können Sie eine drahtlose Umgebung schaffen und die Anschlussmöglichkeiten eines...
  • Seite 56 Schließen Sie den Gehäuselautsprecher an (4-pin SPEAKER1) diesen Header an. (siehe S.2/3, Punkt 21) Gehäuse-Lüfteranschluss Verbinden Sie das Gehäuselüfterkabel mit diesem (3-pin CHA_FAN1) Anschluss und passen Sie den (siehe S.2/3, Punkt 22) schwarzen Draht dem Erdungsstift an. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 57 Sie einen traditionellen 4-Pin ATX 12V Energieversorgung adoptieren. Um die 4-Pin ATX Energieversorgung zu verwenden, stecken Sie bitte Ihre Energieversorgung zusammen mit dem Pin 1 und Pin 5 ein. Installation der 4-Pin ATX 12V Energieversorgung ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 58 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 59: Installation Von Windows Funktionen

    SCHRITT 1: Konfigurieren Sie BIOS. Rufen Sie im BIOS-DIENSTPROGRAMM den Bildschirm „Erweitert“ und „IDE-Konfiguration“ auf. Setzen Sie die Option “SATA Operation Mode” (SATA-Betriebsmodus) auf [IDE]. SCHRITT 2: Installieren Sie Windows ® Vista / Vista 64-Bit in Ihrem System. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 60 64-Bit Betriebssystem auf ® Ihrem System zu installieren. Wenn die Frage “Wo möchten Sie Windows installieren?” erscheint, legen Sie bitte die ASRock Support CD in Ihr optisches Laufwerk ein. Klicken Sie anschließend die “Treiber laden”-Schaltfläche links unten, um die NVIDIA ®...
  • Seite 61 EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup- Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 62 1. Introduction 1. Introduction Merci pour votre achat d’une carte mère ASRock K10N78-1394 / K10N78, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à...
  • Seite 63: Spécifications

    - Supporter 1080p Blu-ray(BD)/ lecteur de HD-DVD (voir ATTENTION 8) - NVIDIA PureVideo HD Prepration Audio - 7.1 Son haute définition de première qualité CH Windows ® Vista (codec audio ALC888) - HDMI Audio avec Chipset enclave ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 64 - 1 x port eSATAII (K10N78-1394) - 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et LED VITESSE) - 1 x port IEEE 1394 (K10N78-1394) - Prise HD Audio: Haut-parleur latéral / Haut-parleur arrière / Central /Basses / Entrée Ligne / Haut-parleur frontal /...
  • Seite 65 - Contrôle direct de la fréquence CPU (voir ATTENTION 16) - ASRock U-COP (voir ATTENTION 17) - Garde d’échec au démarrage (B.F.G.) - ASRock AM2 Boost: Technologie brevetée par ASRock pour augmenter les performances mémoire jusqu’à 12,5% (voir ATTENTION 18) Surveillance - Contrôle de la température CPU...
  • Seite 66 33 pour les détails au sujet de l’eSATAII et de la procédure d’installation eSATAII. 12. La gestion de l’alimentation pour l’USB 2.0 fonctionne bien sous Microsoft Windows Vista 64-bit/ Vista / XP 64-bit / XP SP1; SP2. ® ® ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 67 ASRock WiFi-802.11g ou WiFi-802. 11n. Site Web d’ASRock http://www.asrock.com 14. Il s’agit d’un usage facile ASRock overclocking outil qui vous permet de surveiller votre système en fonction de la monitrice de matériel et overclocker vos périphériques de matériels pour obtenir les meilleures performances du système sous environnement...
  • Seite 68 5. Lorsque vous placez les vis dans les orifices pour vis pour fixer la carte mère sur le châssis, ne serrez pas trop les vis ! Vous risquez sinon d’endommager la carte mère. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 69 Ensuite, connectez le ventilateur du CPU à la prise du VENTILATEUR DU CPU (CPU_FAN1, reportez-vous en page 2/3, No. 3). Pour une bonne installation, veuillez vous référer aux manuels d’instruction sur le ventilateur du CPU et le dissipateur. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 70 2.3 Installation des modules m émoire [DIMM] 2.3 Installation des modules m émoire [DIMM] La carte mère K10N78-1394 / K10N78 dispose de quatre emplacements DIMM DDR2 (Double Data Rate 2) de 240-broches, et supporte la Technologie de Mémoire à Canal Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR2 identiques (de la même marque,...
  • Seite 71 DIMM. Etape 3. Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 72 Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 3 ports PCI et 3 ports PCI Express sur la carte mère K10N78-1394 / K10N78. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Seite 73 NVIDIA GeForce 8400GS Gigabyte GV-NX84G256H 174.83 GeForce 8400GS Foxconn FV-N84SM2DT 174.83 GeForce 8400GS Leadtek WinFast PX8400 GS TDH 174.83 GeForce 8500GT Gigabyte GV-NX85T256H 174.83 HybridPower Vendeur Chipset Modèle Pilote NVIDIA GeForce 9800GX2 ASUS PCIE-ASUS-9800GX2/512M 174.83 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 74 CD sur votre système. Le pilote Hybrid SLI se trouve sous le chemin suivant du CD de support ASRock: (Il y a deux CD de support ASRock dans le pack cadeau de la carte mère, veuillez choisir celui pour Windows ®...
  • Seite 75 CD sur votre système. Le pilote Hybrid SLI se trouve sous le chemin suivant du CD de support ASRock: (Il y a deux CD de support ASRock dans le pack cadeau de la carte mère, veuillez choisir celui pour Windows Vista / Vista 64-bits.)
  • Seite 76 CD sur votre système. Le pilote Hybrid SLI se trouve sous le chemin suivant du CD de support ASRock: (Il y a deux CD de support ASRock dans le pack cadeau de la carte mère, veuillez choisir celui pour Windows Vista / Vista 64-bits.)
  • Seite 77 BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 78 10) (SATAII_6 (PORT5): voir p.2/3 fig. 11) Pour K10N78-1394, SATAII_6 (PORT5) connecteur peut etre utilise pour le device de storage interne ou etre connecte au connecteur eSATAII pour supporter eSATAII device. Veuillez lire “SATAII Interface Introduction” sur le page 33 pour details concernant eSATAII et les procedures d’installation de...
  • Seite 79 SATA / SATAII ou au connecteur (en option) SATAII sur la carte mere. Pour K10N78-1394, vous peut aussi utiliser le cable de data SATA pour connecter le connecteur SATAII_6 (PORT5) et eSATAII. Cordon d’alimentation Veuillez connecter l’extrémité...
  • Seite 80 Cliquer sur « E/S audio», sélectionner « Paramètres du connecteur » , choisir « Désactiver la détection de la prise du panneau de commande » et sauvegarder les changements en cliquant sur « OK ». ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 81 Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le connecter aux broches 1-3. Installation de ventilateur à 3 broches Broches 1-3 connectées ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 82 1394 sur le panel I/O, il y a un (FRONT_1394 br. 9) header de IEEE1394 (voir p.2 No. 30) (FRONT_1394) sur cette carte mere. Le header de IEEE 1394 peut supporter un port de IEEE 1394. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 83 RAID fonctions RAID fonctions RAID fonctions RAID fonctions RAID Si vous voulez installer Windows ® XP / XP 64-bit sur vos disques durs SATA / SATAII sans fonctions RAID, veuillez suivre la procédure ci-dessous. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 84 / Vista 64-bits sur votre système. Lorsque vous voyez la page “Où souhaitez-vous installer Windows ?”, veuillez insérer le CD Support d’ ASRock dans votre lecteur optique, et cliquer sur le bouton “Charger le pilote” en bas à gauche pour charger les pilotes AHCI NVIDIA .
  • Seite 85 (IL y a deux ASRock Support CD dans le paquet de boite de cadeau de la carte mere, veuilliez selectionner un pour Windows Vista / Vista 64-bit.) ® .. \ I386 \ AHCI_Vista (Pour les utilisateurs de Windows ® Vista ..
  • Seite 86 CD-ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 87 1. Introduzione Grazie per aver scelto una scheda madre ASRock K10N78-1394 / K10N78, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Seite 88 Specifiche Piattaforma - ATX Form Factor: 12.0-in x 8.4-in, 30.5 cm x 21.3 cm - Condensatore solido per alimentazione CPU (K10N78-1394) Processore - Supporto per processori Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2...
  • Seite 89 - 1 x porta LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - 1 x Porta IEEE 1394 (K10N78-1394) - Connettore HD Audio: cassa laterale / cassa posteriore / cassa centrale / bassi / ingresso linea / cassa frontale / microfono...
  • Seite 90 64 bit Certificazioni - FCC, CE, WHQL * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi.
  • Seite 91 13. Il collettore USB/WiFi possono essere usati per supportare 2 porte USB 2.0. Possono anche essere usati per supportare la funzione WiFi+AP col modulo ASRock WiFi-802.11g o WiFi-802.11n una scheda WLAN (Wireless Local Area Network) facile da usare. Consente di creare un...
  • Seite 92 ASRock WiFi-802.11g o WiFi-802.11n. Sito ASRock http://www.asrock.com 14. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘ hardware per ottenere la migliore prestazione in Windows ®...
  • Seite 93 5. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 94 Quindi collegare la ventolina CPU al connettore CPU FAN (CPU_FAN1, fare riferimento a pagina 2/3, Numero 3). Per eseguire un’installazione appropriata, fare riferimento al manuale d’istruzioni della ventolina CPU e del dispersore di calore. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 95 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre K10N78-1394 / K10N78 fornisce quattro alloggiamenti DIMM DDR2 (Double Data Rate 2) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR2 negli...
  • Seite 96 DIMM stessa. Step 3. Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 97 Slot di espansione (Slot PCI ed Slot PCI Express) Slot di espansione (Slot PCI ed Slot PCI Express) Sulla scheda madre K10N78-1394 / K10N78 c’è 3 slot PCI ed 3 slot PCI Express. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Seite 98 NVIDIA GeForce 8400GS Gigabyte GV-NX84G256H 174.83 GeForce 8400GS Foxconn FV-N84SM2DT 174.83 GeForce 8400GS Leadtek WinFast PX8400 GS TDH 174.83 GeForce 8500GT Gigabyte GV-NX85T256H 174.83 HybridPower Fornitore Chipset Modello Driver NVIDIA GeForce 9800GX2 ASUS PCIE-ASUS-9800GX2/512M 174.83 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 99 Accedere al sistema operativo. Installare sul sistema il driver Hybrid dal CD di supporto. Il driver Hybrid SLI si trova nel CD ASRock di supporto in: (Nella confezione della scheda madre sono presenti due CD ASRock di supporto, scegliere quello per Windows ® Vista / Vista 64-bit.)
  • Seite 100 Accedere al sistema operativo. Installare nel sistema il driver Hybrid dal CD di supporto. Il driver Hybrid SLI si trova nel CD ASRock di supporto in: (Nella confezione della scheda madre sono presenti due CD ASRock di supporto, scegliere quello per Windows Vista / Vista 64-bit.)
  • Seite 101 Accedere al sistema operativo. Installare nel sistema il driver Hybrid dal CD di supporto. Il driver Hybrid SLI si trova nel CD ASRock di supporto in: (Nella confezione della scheda madre sono presenti due CD ASRock di supporto, scegliere quello per Windows Vista / Vista 64-bit.)
  • Seite 102 BIOS, è necessario riavviare prima il sistema, e poi spegnerlo prima di procedere alla cancellazione della CMOS. 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 103: Descrizione Dei Connettori

    (SATAII_6 (PORT5): 3.0 Gb/s. vedi p.2/3 Nr. 11) Per K10N78-1394, il connettore SATAII_6 (PORT5) può essere utilizzato per il dispositivo di memorizzazione interno o essere collegato al connettore di eSATAII al dispositivo di eSATAII di sostegno. Leggere “Introduzione Dell’Interfaccia Di SATAII” alla pagina 33 per i particolari circa le procedure di installazione di eSATAII e di eSATAII.
  • Seite 104 SATA può essere (Opzionale) collegata al disco rigido SATA / SATAII o al connettore di SATAII su questa cartolina base. Per K10N78-1394, potete anche usare il cavo di dati SATA per collegare il connettore SATAII_6 (PORT5) ed il connettore di eSATAII.
  • Seite 105 Fare clic su “Audio I/O”, selezionare “Impostazioni connettore” , scegliere “Disattiva rilevazione presa pannello anteriore” e salvare la modifica facendo clic su “OK”. 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 106 Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3. Piedini 1-3 collegati Installazione della ventola a 3 piedini 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 107 (vedi p.2 item 34 o p.3 item 33) 1394 (FRONT_1394) sulla scheda madre. Questa intestazione IEEE 1394 puo‘ supportare una porta IEEE 1394. dini 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 108 SATAII senza funzioni RAID, seguire le istruzioni in basso. Utilizzo dei dischi rigidi SATA / SATAII / dei dispositivi eSATAII privi di funzioni NCQ e Hot Plug 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 109 64-bit sul sistema. Quando si vede la pagina “Where do you want to install Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in basso a sinistra, per caricare i driver NVIDIA AHCI.
  • Seite 110 Se il Menù principale non appare automaticamente, posizionarsi sul file ASSETUP.EXE nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 111 1. Introducción 1. Introducción Gracias por su compra de ASRock K10N78-1394 / K10N78 placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 112 1 . 2 Especificación Plataforma - Factor forma ATX: 30,5 cm x 21,3 cm, 12,0” x 8,4” - Condensador sólido para alimentación de CPU (K10N78-1394) Procesador - Soporte para procesadores con zócalo AM2+ y AM2: AMD Phenom FX, Phenom, Athlon 64 FX, Athlon 64 X2 Dual-Core,...
  • Seite 113 - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - 1 x puerto IEEE 1394 (K10N78-1394) - Conexión de audio: Altavoz lateral / Altavoz trasero / Central/Bajos / Entrada de línea / Altavoz frontal / Micrófono (ver ATENCIÓN 9)
  • Seite 114 (vea ATENCIÓN 16) - ASRock U-COP (vea ATENCIÓN 17) - Protección de Falla de Inicio (B.F.G..) - ASRock AM2 Boost: tecnología patentada de ASRock que permite mejorar el rendimiento de la memoria hasta en un 12,5% (vea ATENCIÓN 18) Monitor...
  • Seite 115 Web para obtener los módulos de memoria compatibles. Sitio Web de ASRock: http://www.asrock.com Debido a las limitaciones del sistema, el tamaño real de la memoria debe ser inferior a 4GB para que el sistema pueda funcionar bajo Windows ®...
  • Seite 116 PC. 18. Esta placa base admite la tecnología ASRock AM2 Boost para aumento de la velocidad del reloj. Si habilita esta función en la configuración del BIOS, el rendimiento de la memoria mejorará...
  • Seite 117: Instalación

    5. Al colocar los tornillos en sus agujeros para fijar la placa madre en el chasis, no los apriete demasiado. Eso podría dañar la placa madre. 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 118 Página 2/3, N. 3). Para realizar la instalación correctamente, consulte el manual de instrucciones del ventilador de la CPU y el radiador. 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 119 2.3 Instalación de Memoria 2.3 Instalación de Memoria La placa K10N78-1394 / K10N78 ofrece cuatro ranuras DIMM DDR2 de 240 pines, y soporta Tecnología de Memoria de Doble Canal. Para la configuración de doble canal, necesitará instalar siempre pares DIMM DDR2 idénticos (de la misma marca, velocidad, tamaño y tipo) en las ranuras del mismo color.
  • Seite 120 Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 121 Express) Express) Express) Express) Express) La placa madre K10N78-1394 / K10N78 cuenta con 3 ranuras PCI y 3 ranuras PCI Express. Ranura PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura PCI Express: PCIE1 (ranura PCIE x16; Verde) se utiliza para tarjetas PCI Express con tarjetas gráficas con una anchura de 16...
  • Seite 122 Para disfrutar de la función Hybrid SLI , consulte los siguientes procedimientos de instalación y configuración de acuerdo con el modo que desee utilizar. 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 123 CD de soporte en su sistema. El controlador Hybrid SLI encuentra en la siguiente ruta de acceso del CD de soporte de ASRock: (existen dos CDs de soporte de ASRock en el paquete de la placa base, seleccione uno para Windows...
  • Seite 124 CD de soporte en su sistema. El controlador Hybrid SLI encuentra en la siguiente ruta de acceso del CD de soporte de ASRock: (existen dos CDs de soporte de ASRock en el paquete de la placa base, seleccione uno para Windows...
  • Seite 125 CD de soporte en su sistema. El controlador Hybrid SLI encuentra en la siguiente ruta de acceso del CD de soporte de ASRock: (existen dos CDs de soporte de ASRock en el paquete de la placa base, seleccione uno para Windows...
  • Seite 126 CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 127 (SATAII_6 (PORT5): vea p.2/3, N. 11) Para K10N78-1394, el conectador de SATAII_6 (PORT5) puede ser utilizado para el dispositivo de almacenaje interno o conectado con el conectador del eSATAII para soportar el dispositivo del eSATAII . Por favor lea “Introducción del interfaz de SATAII”...
  • Seite 128 (Opcional) de SATA / SATAII o el conectador de SATAII en esta placa base. Para K10N78-1394, pueda también utilizar el cable de los datos de SATA para conectar el conectador de SATAII_6 (PORT5) y el conectador del eSATAII.
  • Seite 129 WiFi+AP con un módulo de los datos de ASRock WiFi-802.11g o WiFi- nción externa 802.11n, un adaptador de red terfaz actual del inalámbrica de área local e la tarifa de la (WLAN) fácil de usar. Éste le...
  • Seite 130 4 3 2 1 haga coincidir el cable negro pin CPU_FAN1) con el conector de tierra. (vea p.2/3, No. 3) 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 131 Este cabezal del puerto COM se utiliza para admitir un (9-pin COM1) módulo de puerto COM. (vea p.2, No. 34 o p.3, No. 33) 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 132 Siga el orden de arriba a abajo para instalar los controladores requeridos. Los controladores que instale pueden funcionar correctamente. 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 133 Establezca la opción “SATA Operation Mode”(Modo de funcionamiento SATA) en [IDE]. PASO 2: Instale el sistema operativo Windows ® Vista / Vista 64 bits en su sistema. 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 134 ® se encuentran en la siguiente ruta de nuestro CD de soporte: (Hay dos CD del Apoyo de ASRock en el paquete de la caja del regalo de la placa base, por favor elige uno para Windows Vista / Vista 64-bit.)
  • Seite 135 Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo ASSETUP.EXE para iniciar la instalación. 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 136 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 137 ‘ ’ ® ® ® ® ® 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 138 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 139 ® “ ” 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 140 ® ® ® ® ® “ ” ® “ ” “ ” “ ” ® 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 141 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 142 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 143 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 144 DDRII_1 DDRII_2 DDRII_3 DDRII_4 “ ” 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 145 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 146 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 147 ® ® ® ® ® ® ® ® 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 148 ® ® ® ® “ ” ” “ ” “ ” “ ” ® ® ® ® 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 149 “ ” “ ” “ ” “ ” “ ” ® ® “ ” 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 150 “ ” “ ” “ ” “ ” ® ® “ ” 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 151 “ ” “ ” “ ” “ ” 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 152 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 153 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 154 ® ® ® 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 155 ® “ ” “ ” “ ” “ ” ® “ ” “ ” 4 3 2 1 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 156 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 157 ® ® ® ® ® ® ® ® 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 158 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 159 “ ” “ ” “ ” 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 160 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 161 ‘ ’ ® ® ® ® ® 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 162 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 163 ® ® ® “ ” 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 164 ® ® ® ® ® ® ® ® 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 165 ® 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 166 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 167 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 168 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 169 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 170 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 171 ® ® ® ® ® ® ® ® 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 172 ® ® ® ® ® ® ® ® 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 173 ® ® 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 174 ® ® 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 175 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 176 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 177 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 178 ® ® ® ® ® 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 179 4 3 2 1 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 180 ® ® 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 181 ® ® ® ® ® ® ® ® ® ® ® 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 182 ® ® ® ® ® ® 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 183 ® ® 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 184 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 185 ‘ ’ ™ ® ® ® ® ® 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 186 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 187 ® ® ® ® ® ® 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 188 ® ® ® ® 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 189 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 190 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 191 DDRII_1 DDRII_2 DDRII_3 DDRII_4 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 192 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 193 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 194 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 195 ¼t°Ó ªä¤ù²Õ « ¬ ¸ ¹ ÅX°Êµ{§Ç NVIDIA GeForce 9800GX2 ASUS PCIE-ASUS-9800GX2/512M 174.83 ® ® ® ® ® ® ® 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 196 ® ® ® ® 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 197 ® ® 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 198 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 199 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 200 2 0 0 2 0 0 2 0 0 2 0 0 2 0 0 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 201 ® ® ® ® 4 3 2 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 1 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 202 2 0 2 2 0 2 2 0 2 2 0 2 2 0 2 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 203 ® ® ® ® ® ® ® ® ® ® ® ® 2 0 3 2 0 3 2 0 3 2 0 3 2 0 3 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 204 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 0 4 2 0 4 2 0 4 2 0 4 2 0 4 ASRock K10N78-1394 / K10N78 Motherboard...
  • Seite 205 ® ® 2 0 5 2 0 5 2 0 5 2 0 5 2 0 5 ASRock K10N78-1394 / K10N78 Motherboard...

Diese Anleitung auch für:

K10n78

Inhaltsverzeichnis