Selecting The Water Hardness - Siemens TK 60 Gebrauchsanleitung

Selecting the water hardness

It is important for the descaling programme
that the water hardness is set correctly.
Water
hardness 1
q Ascertain the water hardness with the
enclosed test strip.
q The appliance must be in standby mode,
only the illuminated ring on the button
d
4 is lit.
q Simultaneously hold down + 8 but
ton and 4 9 descaling button for at
least 3 seconds until
the display. The number of illuminated
rings around control buttons 4, 5, 8 and
9 symbolise the selected water hardness
(see diagram).
q Press 4 9 descaling button until the
illuminated rings for the desired water
hardness light up. If the illuminated ring for
the 2 button 5 flashes, the filter
(optional accessory) can be set.
q Press 2 button 5 once. The selected
water hardness is saved.
Water
hardness 2 hardness 3
k
is indicated on
If external water softeners are used in the
domestic water system or if filtered water
is used, select water hardness 1.
Water Water
hardness 4
Warning:
The appliance now switches on automatically.
As soon as the illuminated rings on buttons
d
4 and 2 5 as well as the
on display 3 are lit, the appliance is ready
to brew coffee again.
Note: If the 4 9 descaling button is not
pressed for longer than 90 seconds, the
appliance switches to standby mode without
saving the settings. The previously saved
water hardness is retained.
A filter 21 is available as an optional
accessory for the water tank 22. Order
no. 46 1732. Follow the instructions enclosed
with the filter 21.
q First insert filter 21, then set the appliance
according to the instructions.
q Change or remove used filter 21 as soon
as the
If a new filter is not inserted, select water
hardness.
j
symbol lights up on display 3.
Filter
setting
c
symbol
21