Inhaltsverzeichnis
Werbung
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to
the appropriate user instructions the part number of which is indicated in the relevant spare parts list.
Key Functions
b
Switch receiver to stand-by.
0
9
...
The required programme position is
selected directly by pressing the digit
keys, e.g. P 123.
When selecting a multi-digit pro-
gramme position, the digits are
entered in order from left to right. So,
in the example, you would enter 1, 2
and 3.
In this way you can select up to 250
SAT programme positions (SAT TV
and SAT radio).
– Switch receiver on from stand-by.
Switch through programme positions
step by step and switch on from
stand-by to the last programme posi-
tion selected (last station memory).
O
Display name of station on screen;
when in a menu: save.
– In SAT mode: alter volume (at very
low volume, "SAT Mute" is displayed
on the screen).
.
Display on-screen menu guide.
MENUE
¢
D
Without function
¢
Exit menu (without saving).
T XT
EXIT
¢
Select reception unit A or B.
A /B
TV-GUIDE
k
(red)
Function when in a menu.
h
(green) Display Timer menu.
j
(yellow)Switch between stereo, right and left
sound channel.
g
Switch between SAT-TV and SAT
RADIO
(blue)
radio mode.
™
– In TV mode*: alter contrast setting of
TV set.
®
– In SAT mode: display menu for picture
and sound improvements (see chapter
"Using the Receiver").
– In TV mode*: alter brightness setting of
TV set.
¢
TV mode*.
SAT 1/TV
Control of a TV set by pressing this
key and the desired function key simul-
taneously*.
¢
Control of a second SAT receiver
SAT 2
(IR level 2) by pressing this key and the
desired function key simultaneously*.
1
2
3
4
5
6
7
8
9
0
TV-GUIDE
MENUE
A/B
EXIT
TXT
RADIO
DX
SAT 1/TV SAT 2
PERI
VIDEO
TP 820 SAT
¢
Without function.
C
¢
Certain TV sets switch automatically
PERI
from terrestrial mode to AV mode
when the SAT receiver is switched on.
¢
The
key can be used to switch
PERI
the TV set back to terrestrial mode.
* See also chapter "Universal Remote Control" on
page 6.
¢
Video mode*.
VIDEO
Control of a video recorder by simulta-
neously pressing this key and the desi-
red function key having the correspon-
ding orange symbol.
¢
Mute sound; display: "SAT Mute".
Selecting a Programme Position
Picture and Sound Improvement
(Threshold extension/DX)
Use the ]| keys to step through the programme
positions, or use the numeric keys to directly enter
The STR 622 TWIN is especially suited for the
the programme position number.
reception of very weak signal. This is accomplished
by its integrated three-stage threshold extension
Stand-by
circuit DX1, DX2, DX3.
b
Use the
key to switch the receiver to stand-by.
1
Select the desired programme position on recep-
The programme position indications disappear on
tion unit A and press the
the receiver. The red LED for the reception unit A
signals the stand-by mode.
The reception unit A is automatically selected. The
Press one of the ]| keys to switch the receiver
settings made apply automatically for both recep-
on again with the last selected programme position
tion units.
(last station memory), or select the desired pro-
gramme position directly with the numeric keys.
The following menu is displayed:
Even when the receiver is in stand-by, you can play
a video cassette or display the menu from the video
recorder on the TV screen. In this case, the signal is
looped through from the video recorder via the SAT
receiver to the TV set. The receiver's display indi-
AV
cates "
".
Switching between TV and Radio
Programme Position
g
Use the blue
key to switch between the
RADIO
last selected TV programme position and the last
selected radio programme position. In radio mode
the picture screen is blanked – only the station
name is displayed.
Volume
Use the
x c
keys to adjust the volume to suit your
2
Use the
taste. If the volume is very low, "SAT Mute" is dis-
the setting giving the best picture impression and in
played on the picture screen.
the second line the setting giving the best sound
impression in DX mode.
Displaying the Station Name
O
If the signals are extremely weak, it may happen
Press the
key to display the programme
type (TV or radio), the programme position number
that the display is not visible. In this case, press the
and the station name (e.g. for stations without own
green
programme logo) on the picture screen. The indica-
select "DX2" in the first menu line. When pressing
the green
tions for the reception unit A appear at the left,
appears on the screen.
those for the reception unit B at the right.
3
Press the
Stereo/Dual-Channel Sound
values.
Stations with stereo sound broadcast often also
two-channel sound programmes (e.g. German,
4
Press the
j
English). Use the yellow
key to switch between
stereo and the sound channels.
If you exit the menu without saving the setting, the
When switching to another programme position,
previous values are restored when changing the
the previous setting is restored. The setting can
programme position.
permanently be changed in the menu: see section
"Audio Settings" on the pages 14/15.
®
key.
DX
Threshold
:
Off
Audio BW
:
Normal
TXT = Exit
OK = Store
x c
keys to select in the first menu line
h
button (green screen background) and
h
button once again, the TV picture
O
key if you wish to save the selected
¢
key to exit the menu.
T XT
EXIT
Werbung
Inhaltsverzeichnis
