Inhaltsverzeichnis
Werbung
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the
appropriate user instructions the part number of which is indicated in the relevant spare parts list.
The SAT Receiver
SCART
EURO-AV
connections
TV
T V
DECODER
D E
C
V C
R
VCR
A plug-in adapter is supplied for 230 V voltage sup-
ply. The unit is only disconnected from the mains
when the 230 V plug is removed!
EURO-AV connectors
TV
EURO-AV socket (output only) for TV set,
with RGB transfer from the decoder
socket.
DEC
EURO-AV
socket
(input/output)
PAL/MAC decoders or a second video
recorder.
VCR
EURO-AV socket (input/output) for a video
recorder or further PAL decoder.
The SAT Mouse
The SAT Mouse receives the infrared signals from
the remote control and sends commands onto the
receiver via the cable. Therefore mount the SAT
Mouse somewhere where there are no obstacles
between it and the remote control. You can switch
the programme positions with the SAT Mouse but-
tons.
The red operation indicator extinguishes in stand-by
mode.
When switching on from stand-by, the receiver
switches to the last selected programme position
(Last Station Memory).
Voltage supply
11 ... 26 V DC
Remote control/VCR
SAT mouse
SAT aerial
Remote control/VCR
Connector for remote control of the receiver via a
GRUNDIG video recorder (see chapter "Video Recor-
dings ..." on page 18) and for the Datalink function
(see chapter "Special Functions" on page 19).
for
8-pin Western plug
Connection cable
Switch programme position down-
wards / switch on from stand-by.
Switch programme position
upwards / switch on from stand-by
Operation indicator
Infrared receiver
All operating functions and basic settings can be
1
carried out using the TP 820 SAT universal remote
control unit.
2
The remote control unit can also be used to control
TV sets from GRUNDIG and many other makes (see
chapter on "Universal Remote Control").
3
Several keys on the remote control have special
functions in the menu (see page 11).
4
Please insert the batteries supplied observing cor-
rect polarity! Markings on the base of the compart-
ment indicate this. Close cover.
5
Please change used batteries promptly. The on-
screen display "Batterie Telepilot" signals when the
batteries must be changed. We can accept no
liability for damage caused by leaking batteries!
Key Functions
b
Switch receiver to stand-by.
0
9
...
The required programme position is
selected directly by pressing the digit
keys, e.g. P 123.
When selecting a multi-digit pro-
gramme position, the digits are
entered in order from left to right. So,
in the example, you would enter 1, 2
and 3.
In this way you can select up to 199
SAT programme positions (SAT TV
and SAT radio).
– Switch receiver on from stand-by.
Switch through programme positions
step by step and switch on from
stand-by to the last programme posi-
tion selected (Last Station Memory).
O
Display name of station on screen;
when in a menu: save.
– In SAT mode: alter volume (at very
low volume, "SAT Mute" is displayed
on the screen).
.
Display on-screen menu guide.
MENUE
¢
D
Without function
¢
Exit menu (without saving).
T XT
EXIT
¢
Without function
A /B
TV-GUIDE
k
(red)
Socket switching (see chapter
"The STR 100 DX ... as Second
Receiver", page 20).
h
(green) Display Timer menu.
j
(yellow)Switch between stereo, right and left
sound channel.
1
2
3
4
5
6
7
8
9
0
MENUE
TV-GUIDE
EXIT
A/B
TXT
RADIO
DX
SAT 1/TV SAT 2
PERI
VIDEO
TP 820 SAT
g
Switch between SAT-TV and SAT
RADIO
(blue)
radio mode.
™
– In TV mode*: alter contrast setting of
TV set.
®
– In SAT mode: display menu for picture
and sound improvements (see chapter
"Using the Receiver").
– In TV mode*: alter brightness setting of
TV set.
¢
TV mode*.
SAT 1/TV
Control a TV set by pressing this key
and the desired function key simul-
taneously*.
¢
Control a second SAT receiver
SAT 2
(IR level 2) by pressing this key and the
desired function key simultaneously*.
¢
Without function.
C
¢
Certain TV sets switch automatically
PERI
from terrestrial mode to AV mode
when the SAT receiver is switched on.
¢
The
key can be used to switch
PERI
the TV set back to terrestrial mode.
* See also chapter "Universal Remote Control".
Werbung
Inhaltsverzeichnis
