Operating Hints - Grundig STR 6000 Bedienungsanleitung

Allgemeiner Teil / General Section

Operating Hints

This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number
of which is indicated in the relevant spare parts list.
Front panel
Displays
Numeric Indicates the number of the selected programme position.
display When the Timer is activated, »t« appears instead of a pro-
gramme number.
Red LED Lights up when the receiver is switched to stand-by.
Green LED Ligths up when the integrated Timer is activated or switched
to stand-by, i.e. it is waiting for the start time.
Keys
Stand-by key. Switches the receiver to stand-by and from
stand-by back to the last selected programme position
("last station memory").
Selects step by step the next higher programme position.
Selects step by step the next lower programme position.
Remote control keys
" Swiches the receiver to stand-by and from stand-by back to
the last selected programme position ("last station memory").
"
Sound mute key. »STUMM« (mute) appears on the picture
screen.
" ... " Programme selection (also from stand-by) and data entry in
0 9
menu mode.
"
Certain TV sets switch automatically to AV mode when
TV/SAT
putting the SAT receiver into operation. Press this key if you
wish to switch back to terrestrial mode.
"
Keys for toggling between favourite mode (the
FAV
switch only to pre-set satellite programmes, non pre-set
programmes are skipped) and normal mode (the
keys select the next higher or lower programme position,
respectively).
M N
"
Step-by-step programme selection.
"
In menu mode: menu item selection.
T Z
In menu mode: value modification.
" "
"
Press 1x: time display on the picture screen.
Press 2x: TIMER menu display on the picture screen.
When in the TIMER menu: exit.
When you are in a different menu, this will be closed and the
time displayed instead.
"
When in the menus: blue background on and off.
"
Opens/closes the VIDEO menu (when you are in a different
VIDEO
menu, this will be closed and the VIDEO menu opened).
"
Opens/closes the AUDIO menu (when you are in a different
AUDIO
menu, this will be closed and the audio menu opened).
"
Opens/closes the SYSTEM menu (when you are in a different
SYSTEM
menu, this will be closed and the system menu opened).
1 - 8
Rear panel
STR 6000
MAINS INPUT
CH.ADJ.
TSG
AERIAL
TV/VCR
AUDIO OUT
TV
VCR
DECODER
LNC
The type plate is to be found on the bottom of the housing.
How to connect the satellite aerial
Connect the cable of your satellite aerial to the LNC input on the rear panel
1
of the receiver.
Connection via a EURO-AV cable
You get the best picture quality if you use EURO-AV cables ("Euroconnec-
1
tors") for connecting your SAT receiver with a TV set, video recorder and
decoder as shown in the Figure. If this should not be possible, follow the
procedure specified in the paragraph "Connection via the modulator out-
M N put".
" keys
"
M N
When playing back video recordings, the signals from the video recorder
"
"
are looped through the satellite receiver to the TV set.
If you wish to receive also terrestrial programmes, connect the terrestrial
2
aerial cable to the AERIAL socket on the rear of the receiver. The signal for
the video recorder and the TV set is available at the TV/VCR modulator out-
put of the receiver.
MAINS CH.ADJ.
TV /VCR
INPUT
L VCR TV
TSG AERIAL
AUDIO
OUT
R
230V
50 Hz
DO NOT REMOVE COVERS
40W MAX. HAZARD-LIVE PARTS
Connector for plug-in mains cord.
Modulator output tuning control (channels 30 to 45)
Test signal generator switch (for connecting a TV set
or video recorder via the modulator output).
Terrestrial aerial input (VHF/UHF)
Modulator output (VHF/UHF)
Audio cinch connector, left/right stereo channels for
hifi system.
Euroconnector for TV set
Euroconnector for video recorder (VCR)
Euroconnector for external decoder
Satellite dish aerial input
L R
HiFi-Amplifier
CH.ADJ.
MAINS TV /VCR
INPUT
TV DECODER
AERIAL L VCR
TSG
AUDIO
OUT
R
230V
50 Hz DO NOT REMOVE COVERS
HAZARD-LIVE PARTS
40W MAX.
VCR
STR 6000
LNC
14V/18V
DECODER
300mA DC
ASSEMBLED IN U.K.
LNC
14V/18V
300mA DC
ASSEMBLED IN U.K.
Decoder
GRUNDIG Service