Klarstein 10031343 Bedienungsanleitung Seite 12

Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on, the operation will stop automatically
and the buzzer will beep 15 times to alert the user, that the water need to be emptied from the drainage tank .
Lightly press on the sides of the tank with both hands and pull the tank
out gently.
Discard the collected water.
NOTE: 1. Do not remove the float from the water tank. The water full
sensor will no longer be able to detect the water level correctly without
the float and water may leak from the water tank. If the drainage tank is
dirty, wash it with cold or lukewarm water. Do not use detergent, scou-
ring pads, chemically treated dust cloths, gasoline, benzene, thinner,
or other solvents, as these can scratch and damage the tank and cause
water leakage
When replacing the drainage tank, press the tank firmly into place with
both hands. If the tank is not positioned properly, the "TANK FULL"
sensor will be activated, and the dehumidifier will not operate.
12