Petra electric MK 12.07 Bedienungsanleitung Seite 19

Sausage canister
• Fit the scroll in the meat grinder body with the pen pointed outwards,
press it firmly into place. Fit the dough spreader and the sausage
canister so the two recesses are aligned with the tabs on the meat
grinder body.
• Fit the ring nut over the sausage canister and turn clockwise to lock.
The ring nut must hold the screen securely in place. But do not over
tighten.
Dough spreader
• Fit the scroll in the meat grinder body with the pen pointed outwards,
press it firmly into place. Fit the dough spreader and round metal
holder so the two recesses are aligned with the tabs on the meat
grinder body.
• Fit the patterned flat metal strip into the metal holder. Push the metal
strip back or forward to select the pattern.
BLENDER
Safety instructions
• To achieve the best results when blending solid ingredients, put small
portions into the jar one by one instead of putting a large quantity all
at once.
• If you are processing solid ingredients, cut them into small pieces (2-
3cm) first.
• Always place your hand on top of the blender when you are operating
the device.
• Operate the motor for a maximum of 2 minutes to prevent overheating
or consequent damage.
• The water level can not be higher than 1.75L after adding material and
water.
Installing the blender jar
• Place the appliance on a flat surface, e.g. a kitchen counter, and make
sure it is standing firmly.
• Remove the protective cover for the blender.
• Ensure that the protective cover for meat grinder is fitted in place.
• Place the Joint washer and cutting blade onto the cup base. Handle the
cutting blades with care, they are extremely sharp.
• Place the cup base assembly on the glass jar and turn it clockwise to
lock.
• Put your ingredients in the jar and place the lid on the jar.
EN
19