Operation; Vacuuming Of Floors; Vacuuming Of Furniture, Upholstery, Car Interiors, Joints, Corners And Niches - Seg VC 334 Bedienungsanleitung

4 OPERATION

4.1 Vacuuming floors
1. Select the universal floor brush which is suitable to vacuum carpets and hard floors.
2. Connect the universal floor brush with the lower part of the suction tube.
3. Connect the suction opening of the handheld device with the upper part of the
suction tube.
4. With the release button on the suction tube adjust the tube to its desired length.
5. Connect the device to the power supply.
6. Turn on the device by pressing the on/off button.
7. When you are finished with vacuuming turn off the device by pressing the on/off
button.
8. Disconnect the device from the power supply.
9. Empty the dust container. Follow the instructions in chapter 5 – CLEANING AND
MAINTENANCE.
4.2 Vacuuming furniture, upholstery, car interiors, joints, corners and niches
1. Select the 2 in 1 nozzle. This attachment has a furniture brush and crevice nozzle.
2. Connect the 2 in 1 nozzle with the suction opening of the handheld device.
3. Push the 2 in 1 nozzle upwards or downwards depending on the use of the furniture
brush or crevice nozzle:
• Use the furniture brush to clean furniture, lamps, windowsills, skirting boards as
well as delicate and easy breakable objects such as picture frames, keyboards,
books etc.
• The crevice nozzle is for vacuuming floors, steps, car interiors, upholstery and
joints, corners and niches.
4. Connect the device to the power supply.
5. Turn on the device by pressing the on/off button.
6. When you are finished with vacuuming turn off the device by pressing the on/off
button.
7. Disconnect the device from the power supply.
8. Empty the dust container. Follow the instructions in chapter 5 – CLEANING AND
MAINTENANCE.
31