4. Take out carefully the sponge filter from the filter holder. Attention: The thin fabric filter
is firmly attached to the filter holder and cannot be taken out.
5. Pull out carefully the cyclone filter from the dust container.
6. Turn counterclockwise the lid of the cyclone filter and remove it.
7. Tap off the sponge filter and cyclone filter over a dust bin.
8. If necessary clean all parts with clean, luke-warm water. Do not use detergents.
9. Let the cleaned parts dry completely in the open air before inserting them into the device.
Cleaning surfaces
Clean the device surface with a soft, damp cloth.
• Do not use harsh, aggressive and corrosive detergents
• Do not use alcohol or other solvents
• Do not use abrasives
• Do not use essential oils
These instructions apply for all surfaces of your device. The surface of the product can
be damaged by using such detergents.
33