Intended Use; Special Safety Instructions - Ayce Z1C-DW-32M3 Originalbetriebsanleitung

INTENDED USE

The machine is intended for hammer drilling in concrete, brick and stone, as well as
for light chiseling work. It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.

SPECIAL SAFETY INSTRUCTIONS

1. Wear ear protectors. Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool. Loss of control can cause
personal injury.
3. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
4. Wear dust mask, dust powder can cause personal injury.
5. Always keep the extension cable well away from the workplace.
6. Rotary hammer, tools and accessories shall only be used in the way as stated
for normal use.
7. Always hold the machine with both hands during operation and adopt a safe
stance.
8. For outdoor use the machine must be connected to a socket which is
connected with a current surge preventing switch.
9. Dust and splinters must not be removed while the machine is running.
10. When drilling in walls ceiling, or floor, take care to avoid electric cables and
gas or water pipes.
11. Small work-piece must be secured tightly to avoid the turning of work-piece
with drill-bits.
12. Always disconnect the power plug before performing any work on the
machine, or not in use.
13. Only connect the power plug when the machine is OFF. Disconnect the power
plug after use.