Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Instruction
Telimat T 1
Assembly begins by placing the frame bracket (Fig.1) into position. The frame bracket can be
used as a drill template.
•
Centre pop for the 12.5 ∅ hole which is dimensioned according to diagram 1, views X
and Y (see overleaf).
•
Drill out a 12.5 ∅ hole.
•
Deburr the hole.
•
Place the frame bracket into position and secure in place with the M12x30 bolt and nut.
•
Now, using the bracket as a template, mark out the missing holes on the sloped surface
of the frame.
•
Remove the frame bracket.
•
Centre pop and drill out to 12.5 ∅.
•
Deburr the holes.
13
Werbung
