Advanced Operations - Kenwood NX-220 Bedienungsanleitung

DTMF (DUAL TONE MULTI FREQUENCY) CALLS
■ Making a DTMF Call (Types I and II Only)
Manual Dialing (Type I Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
• If you release the PTT switch, transmit mode will end even
if the complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by
your dealer, you do not need to press the PTT switch to
transmit; you can make the call simply by pressing the
DTMF keys.
Store & Send
1 Press the key programmed as [Autodial].
2 Enter up to 30 digits using the DTMF keypad.
• Alternatively, you can enter digits by using the Selector.
3 Press the PTT switch to make the call.
■ Autodial (Types I and II Only)
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as [Autodial].
• The first entry in the Autodial list appears on the display.
2 Press the <B or C> key to select your desired Autodial list
number, or enter the list number directly (01 ~ 32).
• The stored entry appears on the display.
3 Press the PTT switch to make the call.

ADVANCED OPERATIONS

23