ASSEMBLY INSTRUCTIONS
Level adjustment instructions
Fig.5
Moving the treadmill instructions
Fig.6
Changing to table/bench instructions
18
A. After placing the equipment at the intended lo-
B. Tip the item to the left/right. You will then see the
A. Turn the power switch off.
B. Unplug the power cord.
C. Fold the treadmill and make sure the lock is se-
D. Make sure the motor is on the bottom side.
E. Simply roll the treadmill with two transportation
Make sure the
motor is on the
bottom side.
To change the treadmill into table or bench position,
follow the drawing on the left to gently lie the tread-
mill on the floor.
NOTE: The purpose of the Levelers (23) is to level
the item. Adjust the Levelers (23) at all four sides
until the item rests on the floor without rocking.
Fig.7
cation for use, make sure the item rests firmly
on the floor. To level the item, please follow the
following steps.
Levelers (23). To make the Levelers (23) rest
firmly on the floor, turn the Levelers (23) clock-
wise until the Levelers (23) touch the floor com-
pletely. The device should be positioned comple-
tely leveled - if not, repeat the above process.
cured.
wheels to the desired location.