Level Adjustment; Moving The Treadmill; Changing To Table/Bench - Skandika Fitness SF-1500 Aufbau- Und Bedienungsanleitung

ENGLISH
ASSEMBLY INSTRUCTIONS
Level adjustment instructions
Fig.5
Moving the treadmill instructions
Fig.6
Changing to table/bench instructions
18
Make sure the
motor is on the
bottom side.
Fig.7
A. After placing the equipment at the intended
location for use, make sure the item rests firmly
on the floor. To level the item, please follow the
following steps.
B. Tip the item to the left/right. You will then see
the Levelers (23). To make the Levelers (23)
rest firmly on the floor, turn the Levelers (23)
clockwise until the Levelers (23) touch the floor
completely. The device should be positioned
completely leveled - if not, repeat the above
process.
A. Turn the power switch off.
B. Unplug the power cord.
C. Fold the treadmill and make sure the lock is
secured.
D. Make sure the motor is on the bottom side.
E. Simply roll the treadmill with two transportation
wheels to the desired location.
To change the treadmill into table or bench positi-
on, follow the drawing on the left to gently lie the
treadmill on the floor.
NOTE: The purpose of the Levelers (23) is to level
the item. Adjust the Levelers (23) at all four sides
until the item rests on the floor without rocking.