Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Adjust Release Cord
3
Wood Stud Mounting
6901-002064 <01>
Adjust release cord until bottom of cord is level with the
bottom of the TV.
Locate a stud. Verify the center of the stud using an edge
to edge stud fi nder.
CAUTION:
power of the lag bolt. To avoid potential injuries or
property damage:
Any material covering the wall must not exceed 16
mm (5⁄8 in.).
< 16 mm
Minimum wood stud size: common 2 x 4 in. (nominal
(5/8 in.)
1 ½ x 3 ½ in.)
Improper use could reduce the holding
7
Werbung
