AEG DF 6164 Benutzerinformation Seite 32

• Insert the cooker hood in the wall cabinet, ensuring to position the
cooker hood bracket E above the wall cabinet bracket D (Fig. 8).
Thread the electric cable through the appropriate perforation.
• Block the cooker hood with two screws on the frontal part (Fig. 8 –
one per side).
• Connect the cable to the electrical mains, only when the installation
is completed.
• If the cooker hood should not touch perfectly with the lower border
of the wall cabinet then regulate by loosening the screws P of the
brackets E mounted on the cooker hood (Fig. 7), it will be possible
to regulate the perfect matching of the cooker hood and wall
cabinet, once regulated tighten the screws.
• Regulate the gliding of the extractable drawer in relation to the
32
D
E
Fig. 8