Charcoal Filter - AEG DF 6164 Benutzerinformation

Charcoal filter

• The charcoal filter should only be used if you want to use the hood
in recirculation mode.
• To do this you will need an original charcoal filter (Available from
your local Service Force Centre).
• Replacing the charcoal filter
This filter cannot be cleaned or reused.
As a general rule, the activated charcoal filter should be changed
once every 4 months.
• Fitting - Fig. 4
Pull out the drawer, remove the grease filter/s.
Fit the charcoal filter so that it covers the grilles protecting the hood
motor and fan, turn the carbon filter handle P in a clockwise
direction. Refit the grease filters/s.
• To remove proceed in the reverse order.
• Always specify the hood model number, serial number and product
number code when ordering replacement filters. This information is
shown on the rating plate located on the inside of the unit.
• The charcoal filter can be ordered from your local Service Force
Centre.
Fig. 4
24
P
P